SIMPLE  =                T / Standard FITS (NOST-100-2.0)
BITPIX  =                8 / Number of bits per pix value
NAXIS   =                0 / Number of axes in data array
EXTEND  =                T / FITS Extension may be present
ORIGIN  = 'European Southern Observatory' / European Southern Observatory
DATE    = '2024-12-12T01:26:54.0000' / Date this file was written
TELESCOP= 'ESO-VLTI-U1234' / ESO <TEL>
INSTRUME= 'MATISSE'        / Instrument used.
OBJECT  = 'STD,RMNREC'     / Original target.
RA      =        40.377193 / [deg] 02:41:30.5 RA (J2000) pointing
DEC     =          0.54595 / [deg] 00:32:45.4 DEC (J2000) pointing
EQUINOX =           2000.0 / Standard FK5
RADECSYS= 'FK5'            / Coordinate system
MJD-OBS =   60656.06031422 / Obs start
DATE-OBS= '2024-12-12T01:26:51.148255' / Observing date
UTC     =         5209.000 / [s] 01:26:48.000 UTC
LST     =         7810.899 / [s] 02:10:10.899 LST
PI-COI  = 'UNKNOWN'        / PI-COI name.
OBSERVER= 'UNKNOWN'        / Name of observer.
HIERARCH ESO COU AO SYSTEM = 'GPAO' / AO System name [list_item].
HIERARCH ESO COU GUID DEC = 0.00000 / 00:00:00.0 DEC in J2000
HIERARCH ESO COU GUID MAG = 6.40000 / Given Coude guide star magnitude
HIERARCH ESO COU GUID MODE = 'NGS_VIS' / VLTI mode of Coude guiding
HIERARCH ESO COU GUID RA = 0.000000 / 00:00:00.0 RA in J2000
HIERARCH ESO COU GUID STATUS = 'ON' / VLTI guiding substate
HIERARCH ESO COU GUID WAVELEN = 650.00000 / Effective wavelength
HIERARCH ESO DEL DLT1 OPL END = 15.236275270 / Position at end for DL beam 1
HIERARCH ESO DEL DLT1 OPL START = 15.097407304 / Position at start for DL beam i
HIERARCH ESO DEL DLT1 VCM CURV = 0.000687854 / mm-1 actual curv. of VCM beam i
HIERARCH ESO DEL DLT1 VCM TRACK = 'ON' / VCM tracking beam i
HIERARCH ESO DEL DLT2 OPL END = 45.825696692 / Position at end for DL beam 1
HIERARCH ESO DEL DLT2 OPL START = 45.825706999 / Position at start for DL beam i
HIERARCH ESO DEL DLT2 VCM CURV = 0.001716916 / mm-1 actual curv. of VCM beam i
HIERARCH ESO DEL DLT2 VCM TRACK = 'ON' / VCM tracking beam i
HIERARCH ESO DEL DLT3 OPL END = 54.149512668 / Position at end for DL beam 1
HIERARCH ESO DEL DLT3 OPL START = 54.327038289 / Position at start for DL beam i
HIERARCH ESO DEL DLT3 VCM CURV = 0.002166952 / mm-1 actual curv. of VCM beam i
HIERARCH ESO DEL DLT3 VCM TRACK = 'ON' / VCM tracking beam i
HIERARCH ESO DEL DLT4 OPL END = 42.456509058 / Position at end for DL beam 1
HIERARCH ESO DEL DLT4 OPL START = 43.013302828 / Position at start for DL beam i
HIERARCH ESO DEL DLT4 VCM CURV = 0.002147640 / mm-1 actual curv. of VCM beam i
HIERARCH ESO DEL DLT4 VCM TRACK = 'ON' / VCM tracking beam i
HIERARCH ESO DEL FT SENSOR = 'MATISSE' / Fringe Tracker Sensor Name
HIERARCH ESO DEL FT STATUS = 'ON' / Fringe Tracker Status
HIERARCH ESO DEL REF NAME = 'DL2' / Reference DEL Name
HIERARCH ESO DEL REF OPL = 0.000000000 / position
HIERARCH ESO DET TRACK GAIN = 0.5000 / Gain for coherencing
HIERARCH ESO DET TRACK MASTER = 'L' / Master band for coherencing (L or N
HIERARCH ESO DET TRACK MEAN1 = 0.9818 / Mean tracking ratio on IP1 DL on exposur
HIERARCH ESO DET TRACK MEAN2 = 1.0000 / Mean tracking ratio on IP3 DL on exposur
HIERARCH ESO DET TRACK MEAN3 = 0.9636 / Mean tracking ratio on IP5 DL on exposur
HIERARCH ESO DET TRACK MEAN4 = 1.0000 / Mean tracking ratio on IP7 DL on exposur
HIERARCH ESO DET TRACK MODE = 2 / Tracking mode
HIERARCH ESO DET TRACK THRMIN = 2.0000 / [um] Minimum OPD correction threshold
HIERARCH ESO DET1 TRACK ALGOTYPE = 147 / Bitwise value for quick-look algorithm
HIERARCH ESO DET1 TRACK NCOH = 1 / Number of frames for coherent integration
HIERARCH ESO DET1 TRACK NINCOH = 1 / Number of frames for incoherent integration
HIERARCH ESO DET1 TRACK SNRLIMIT = 10.0000 / Fringe peak detection limit in SNR
HIERARCH ESO DET2 TRACK ALGOTYPE = 147 / Bitwise value for quick-look algorithm
HIERARCH ESO DET2 TRACK NCOH = 5 / Number of frames for coherent integration
HIERARCH ESO DET2 TRACK NINCOH = 10 / Number of frames for incoherent integratio
HIERARCH ESO DET2 TRACK SNRLIMIT = 5.0000 / Fringe peak detection limit in SNR
HIERARCH ESO DPR CATG = 'CALIB' / Observation category
HIERARCH ESO DPR TECH = 'INTERFEROMETRY' / Observation technique
HIERARCH ESO DPR TYPE = 'STD,RMNREC' / Observation type
HIERARCH ESO INS BCD1 ENC = 11167 / [Enc] BCD device absolute position.
HIERARCH ESO INS BCD1 ID = 'IN' / BCD device unique ID.
HIERARCH ESO INS BCD1 NAME = 'IN' / BCD device name.
HIERARCH ESO INS BCD1 NO = 2 / BCD device slot number.
HIERARCH ESO INS BCD1 TYPE = 'NA' / BCD device element type.
HIERARCH ESO INS BCD2 ENC = 10805 / [Enc] BCD device absolute position.
HIERARCH ESO INS BCD2 ID = 'IN' / BCD device unique ID.
HIERARCH ESO INS BCD2 NAME = 'IN' / BCD device name.
HIERARCH ESO INS BCD2 NO = 2 / BCD device slot number.
HIERARCH ESO INS BCD2 TYPE = 'NA' / BCD device element type.
HIERARCH ESO INS BCOP1 ENC = 23956 / [Enc] Absolute position of the BCD OPD adj.
HIERARCH ESO INS BCOP1 POS = 23956 / [Enc] Position of the BCD OPD adj. device.
HIERARCH ESO INS BCOP2 ENC = 24920 / [Enc] Absolute position of the BCD OPD adj.
HIERARCH ESO INS BCOP2 POS = 24920 / [Enc] Position of the BCD OPD adj. device.
HIERARCH ESO INS BCOP3 ENC = 29349 / [Enc] Absolute position of the BCD OPD adj.
HIERARCH ESO INS BCOP3 POS = 29349 / [Enc] Position of the BCD OPD adj. device.
HIERARCH ESO INS BCOP4 ENC = 36614 / [Enc] Absolute position of the BCD OPD adj.
HIERARCH ESO INS BCOP4 POS = 36614 / [Enc] Position of the BCD OPD adj. device.
HIERARCH ESO INS BCTP1 ENC = 29896 / [Enc] Absolute position of the BCD Tip.
HIERARCH ESO INS BCTP1 POS = 29896 / [Enc] Position of the BCD Tip adj. device.
HIERARCH ESO INS BCTP2 ENC = 29833 / [Enc] Absolute position of the BCD Tip.
HIERARCH ESO INS BCTP2 POS = 29833 / [Enc] Position of the BCD Tip adj. device.
HIERARCH ESO INS BCTP3 ENC = 40409 / [Enc] Absolute position of the BCD Tip.
HIERARCH ESO INS BCTP3 POS = 40409 / [Enc] Position of the BCD Tip adj. device.
HIERARCH ESO INS BCTP4 ENC = 32161 / [Enc] Absolute position of the BCD Tip.
HIERARCH ESO INS BCTP4 POS = 32161 / [Enc] Position of the BCD Tip adj. device.
HIERARCH ESO INS BCTT1 ENC = 32389 / [Enc] Absolute position of the BCD Tilt dev
HIERARCH ESO INS BCTT1 POS = 32389 / [Enc] Position of the BCD Tilt adj. device.
HIERARCH ESO INS BCTT2 ENC = 30400 / [Enc] Absolute position of the BCD Tilt dev
HIERARCH ESO INS BCTT2 POS = 30400 / [Enc] Position of the BCD Tilt adj. device.
HIERARCH ESO INS BCTT3 ENC = 23293 / [Enc] Absolute position of the BCD Tilt dev
HIERARCH ESO INS BCTT3 POS = 23293 / [Enc] Position of the BCD Tilt adj. device.
HIERARCH ESO INS BCTT4 ENC = 47524 / [Enc] Absolute position of the BCD Tilt dev
HIERARCH ESO INS BCTT4 POS = 47524 / [Enc] Position of the BCD Tilt adj. device.
HIERARCH ESO INS BSL1 ID = 'pshut1' / L&M BSL shutter ID.
HIERARCH ESO INS BSL1 MODE = 'NORMAL' / Periodic/Fast Shutter to set if NORMAL
HIERARCH ESO INS BSL1 NAME = 'fast shutter L1' / L&M BSL shutter name.
HIERARCH ESO INS BSL1 ST = T / L&M BSL shutter open.
HIERARCH ESO INS BSL2 ID = 'bsl2' / L&M BSL shutter ID.
HIERARCH ESO INS BSL2 NAME = 'fast shutter L2' / L&M BSL shutter name.
HIERARCH ESO INS BSL2 ST = T / L&M BSL shutter open.
HIERARCH ESO INS BSL3 ID = 'bsl3' / L&M BSL shutter ID.
HIERARCH ESO INS BSL3 NAME = 'fast shutter L3' / L&M BSL shutter name.
HIERARCH ESO INS BSL3 ST = T / L&M BSL shutter open.
HIERARCH ESO INS BSL4 ID = 'bsl4' / L&M BSL shutter ID.
HIERARCH ESO INS BSL4 NAME = 'fast shutter L4' / L&M BSL shutter name.
HIERARCH ESO INS BSL4 ST = T / L&M BSL shutter open.
HIERARCH ESO INS BSN1 ID = 'bsn1' / N BSN shutter ID.
HIERARCH ESO INS BSN1 MODE = 'NORMAL' / Periodic/Fast Shutter to set if NORMAL
HIERARCH ESO INS BSN1 NAME = 'fast shutter N1' / N BSN shutter name.
HIERARCH ESO INS BSN1 ST = F / N BSN shutter open.
HIERARCH ESO INS BSN2 ID = 'bsn2' / N BSN shutter ID.
HIERARCH ESO INS BSN2 NAME = 'Shut N beam 2' / N BSN shutter name.
HIERARCH ESO INS BSN2 ST = F / N BSN shutter open.
HIERARCH ESO INS BSN3 ID = 'bsn3' / N BSN shutter ID.
HIERARCH ESO INS BSN3 NAME = 'Shut N beam 3' / N BSN shutter name.
HIERARCH ESO INS BSN3 ST = F / N BSN shutter open.
HIERARCH ESO INS BSN4 ID = 'bsn4' / N BSN shutter ID.
HIERARCH ESO INS BSN4 NAME = 'Shut N beam 4' / N BSN shutter name.
HIERARCH ESO INS BSN4 ST = T / N BSN shutter open.
HIERARCH ESO INS CLLX1 ENC = 19436 / [Enc] Absolute position of the L&M CUL late
HIERARCH ESO INS CLLX1 POS = 19436 / [Enc] Position of the L&M CUL lateral X adj
HIERARCH ESO INS CLLX2 ENC = 22331 / [Enc] Absolute position of the L&M CUL late
HIERARCH ESO INS CLLX2 POS = 22331 / [Enc] Position of the L&M CUL lateral X adj
HIERARCH ESO INS CLLX3 ENC = 24015 / [Enc] Absolute position of the L&M CUL late
HIERARCH ESO INS CLLX3 POS = 24015 / [Enc] Position of the L&M CUL lateral X adj
HIERARCH ESO INS CLLX4 ENC = 14455 / [Enc] Absolute position of the L&M CUL late
HIERARCH ESO INS CLLX4 POS = 14455 / [Enc] Position of the L&M CUL lateral X adj
HIERARCH ESO INS CLLY1 ENC = 38832 / [Enc] Absolute position of the L&M CUL late
HIERARCH ESO INS CLLY1 POS = 38832 / [Enc] Position of the L&M CUL lateral Y adj
HIERARCH ESO INS CLLY2 ENC = 32799 / [Enc] Absolute position of the L&M CUL late
HIERARCH ESO INS CLLY2 POS = 32799 / [Enc] Position of the L&M CUL lateral Y adj
HIERARCH ESO INS CLLY3 ENC = 10859 / [Enc] Absolute position of the L&M CUL late
HIERARCH ESO INS CLLY3 POS = 10859 / [Enc] Position of the L&M CUL lateral Y adj
HIERARCH ESO INS CLLY4 ENC = 16336 / [Enc] Absolute position of the L&M CUL late
HIERARCH ESO INS CLLY4 POS = 16336 / [Enc] Position of the L&M CUL lateral Y adj
HIERARCH ESO INS CLTP1 ENC = 35182 / [Enc] Absolute position of the L&M CUL tip
HIERARCH ESO INS CLTP1 POS = 35182 / [Enc] Position of the coalignment Tip adj.
HIERARCH ESO INS CLTP2 ENC = 27313 / [Enc] Absolute position of the L&M CUL tip
HIERARCH ESO INS CLTP2 POS = 27313 / [Enc] Position of the coalignment Tip adj.
HIERARCH ESO INS CLTP3 ENC = 25821 / [Enc] Absolute position of the L&M CUL tip
HIERARCH ESO INS CLTP3 POS = 25821 / [Enc] Position of the coalignment Tip adj.
HIERARCH ESO INS CLTP4 ENC = 21683 / [Enc] Absolute position of the L&M CUL tip
HIERARCH ESO INS CLTP4 POS = 21683 / [Enc] Position of the coalignment Tip adj.
HIERARCH ESO INS CLTT1 ENC = 40971 / [Enc] Absolute position of the L&M coalignm
HIERARCH ESO INS CLTT1 POS = 40971 / [Enc] Position of the coalignment Tilt adj.
HIERARCH ESO INS CLTT2 ENC = 31040 / [Enc] Absolute position of the L&M coalignm
HIERARCH ESO INS CLTT2 POS = 31040 / [Enc] Position of the coalignment Tilt adj.
HIERARCH ESO INS CLTT3 ENC = 28254 / [Enc] Absolute position of the L&M coalignm
HIERARCH ESO INS CLTT3 POS = 28254 / [Enc] Position of the coalignment Tilt adj.
HIERARCH ESO INS CLTT4 ENC = 34602 / [Enc] Absolute position of the L&M coalignm
HIERARCH ESO INS CLTT4 POS = 34602 / [Enc] Position of the coalignment Tilt adj.
HIERARCH ESO INS CNLX1 ENC = 22104 / [Enc] Absolute position of the N CUN latera
HIERARCH ESO INS CNLX1 POS = 22104 / [Enc] Position of the N CUN lateral X adj.
HIERARCH ESO INS CNLX2 ENC = 38114 / [Enc] Absolute position of the N CUN latera
HIERARCH ESO INS CNLX2 POS = 38114 / [Enc] Position of the N CUN lateral X adj.
HIERARCH ESO INS CNLX3 ENC = 33589 / [Enc] Absolute position of the N CUN latera
HIERARCH ESO INS CNLX3 POS = 33589 / [Enc] Position of the N CUN lateral X adj.
HIERARCH ESO INS CNLX4 ENC = 26252 / [Enc] Absolute position of the N CUN latera
HIERARCH ESO INS CNLX4 POS = 26252 / [Enc] Position of the N CUN lateral X adj.
HIERARCH ESO INS CNLY1 ENC = 40544 / [Enc] Absolute position of the N CUN latera
HIERARCH ESO INS CNLY1 POS = 40544 / [Enc] Position of the N CUN lateral Y adj.
HIERARCH ESO INS CNLY2 ENC = 30086 / [Enc] Absolute position of the N CUN latera
HIERARCH ESO INS CNLY2 POS = 30086 / [Enc] Position of the N CUN lateral Y adj.
HIERARCH ESO INS CNLY3 ENC = 19158 / [Enc] Absolute position of the N CUN latera
HIERARCH ESO INS CNLY3 POS = 19158 / [Enc] Position of the N CUN lateral Y adj.
HIERARCH ESO INS CNLY4 ENC = 20620 / [Enc] Absolute position of the N CUN latera
HIERARCH ESO INS CNLY4 POS = 20620 / [Enc] Position of the N CUN lateral Y adj.
HIERARCH ESO INS CNTP1 ENC = 33504 / [Enc] Absolute position of the N CUN tip ad
HIERARCH ESO INS CNTP1 POS = 33504 / [Enc] Position of the N CUN tip adj. Device
HIERARCH ESO INS CNTP2 ENC = 34242 / [Enc] Absolute position of the N CUN tip ad
HIERARCH ESO INS CNTP2 POS = 34242 / [Enc] Position of the N CUN tip adj. Device
HIERARCH ESO INS CNTP3 ENC = 33694 / [Enc] Absolute position of the N CUN tip ad
HIERARCH ESO INS CNTP3 POS = 33694 / [Enc] Position of the N CUN tip adj. Device
HIERARCH ESO INS CNTP4 ENC = 36324 / [Enc] Absolute position of the N CUN tip ad
HIERARCH ESO INS CNTP4 POS = 36324 / [Enc] Position of the N CUN tip adj. Device
HIERARCH ESO INS CNTT1 ENC = 33948 / [Enc] Absolute position of the N CUN tilt a
HIERARCH ESO INS CNTT1 POS = 33948 / [Enc] Position of the CUN tilt adj. device.
HIERARCH ESO INS CNTT2 ENC = 38490 / [Enc] Absolute position of the N CUN tilt a
HIERARCH ESO INS CNTT2 POS = 38490 / [Enc] Position of the CUN tilt adj. device.
HIERARCH ESO INS CNTT3 ENC = 34097 / [Enc] Absolute position of the N CUN tilt a
HIERARCH ESO INS CNTT3 POS = 34097 / [Enc] Position of the CUN tilt adj. device.
HIERARCH ESO INS CNTT4 ENC = 41048 / [Enc] Absolute position of the N CUN tilt a
HIERARCH ESO INS CNTT4 POS = 41048 / [Enc] Position of the CUN tilt adj. device.
HIERARCH ESO INS CPL1 ENC = 36513 / [Enc] Absolute position of the L&M CPL devic
HIERARCH ESO INS CPL1 POS = 36513 / [Enc] Position of the L&M CPL device.
HIERARCH ESO INS CPL2 ENC = 38708 / [Enc] Absolute position of the L&M CPL devic
HIERARCH ESO INS CPL2 POS = 38708 / [Enc] Position of the L&M CPL device.
HIERARCH ESO INS CPL3 ENC = 21481 / [Enc] Absolute position of the L&M CPL devic
HIERARCH ESO INS CPL3 POS = 21481 / [Enc] Position of the L&M CPL device.
HIERARCH ESO INS CPL4 ENC = 19997 / [Enc] Absolute position of the L&M CPL devic
HIERARCH ESO INS CPL4 POS = 19997 / [Enc] Position of the L&M CPL device.
HIERARCH ESO INS CPN1 ENC = 48480 / [Enc] Absolute position of the N CPN device.
HIERARCH ESO INS CPN1 POS = 48480 / [Enc] Position of the N CPN device.
HIERARCH ESO INS CPN2 ENC = 31424 / [Enc] Absolute position of the N CPN device.
HIERARCH ESO INS CPN2 POS = 31424 / [Enc] Position of the N CPN device.
HIERARCH ESO INS CPN3 ENC = 21362 / [Enc] Absolute position of the N CPN device.
HIERARCH ESO INS CPN3 POS = 21362 / [Enc] Position of the N CPN device.
HIERARCH ESO INS CPN4 ENC = 26903 / [Enc] Absolute position of the N CPN device.
HIERARCH ESO INS CPN4 POS = 26903 / [Enc] Position of the N CPN device.
HIERARCH ESO INS DATE = '2018-01-01' / Instrument release date (yyyy-mm-dd).
HIERARCH ESO INS DIAPH ENC = 4003 / [Enc] Absolute position of the diaphragm uni
HIERARCH ESO INS DIAPH POS = 28.10 / [mm] Absolute position of the diaphragm uni
HIERARCH ESO INS DID1 = 'MATISSE_ICS-395704' / Data dictionary for INS.
HIERARCH ESO INS DID2 = 'PRIMARY-FITS-1.2' / Data dictionary for INS.
HIERARCH ESO INS DIL ENC = -965511 / [Enc] L&M DIL wheel absolute position.
HIERARCH ESO INS DIL ID = 'LOW' / L&M DIL  unique id.
HIERARCH ESO INS DIL NAME = 'LOW' / L&M DIL name.
HIERARCH ESO INS DIL NO = 6 / L&M DIL wheel position index.
HIERARCH ESO INS DIN ENC = -953506 / [Enc] N DIL wheel absolute position.
HIERARCH ESO INS DIN ID = 'LOW' / N DIL unique id.
HIERARCH ESO INS DIN NAME = 'LOW' / N DIL name.
HIERARCH ESO INS DIN NO = 6 / N DIL wheel position index.
HIERARCH ESO INS FFD ENC = 4800 / [Enc] Component absolute position.
HIERARCH ESO INS FFD ID = 'PUP20' / FFD unique ID.
HIERARCH ESO INS FFD NAME = 'PUP20' / FFD name.
HIERARCH ESO INS FFD NO = 1 / Flat Field Device slot number.
HIERARCH ESO INS FFD TYPE = 'MASK' / FFD element type.
HIERARCH ESO INS FFDC ID = 'ffdc' / Flat Field Device ID.
HIERARCH ESO INS FFDC INTPOWER = 0.000000 / Flat Field Device intensity in perce
HIERARCH ESO INS FFDC NAME = 'FFD control' / Flat Field Device name.
HIERARCH ESO INS FFDC ST = F / Flat Field Device activated.
HIERARCH ESO INS FFDC STAT = 'OFF' / Flat Field Device position.
HIERARCH ESO INS FFDC SWSIM = T / If T, Flat Field Device is software simulated.
HIERARCH ESO INS FIL ENC = -995990 / [Enc] L&M FIL wheel absolute position.
HIERARCH ESO INS FIL ID = 'LM' / L&M FIL unique id.
HIERARCH ESO INS FIL NAME = 'LM' / L&M FIL name.
HIERARCH ESO INS FIL NO = 2 / L&M FIL wheel position index.
HIERARCH ESO INS FIN ENC = -514979 / [Enc] N FIN wheel absolute position.
HIERARCH ESO INS FIN ID = 'OPEN' / N FIN unique id.
HIERARCH ESO INS FIN NAME = 'OPEN' / N FIN name.
HIERARCH ESO INS FIN NO = 1 / Filter wheel position index.
HIERARCH ESO INS ID = 'MATISSE/176642' / Instrument ID.
HIERARCH ESO INS MODE = 'HYBRID' / Instrument mode used.
HIERARCH ESO INS OML1 PERIOD = 0.273 / [sec] Timer output period of the L&M OPD
HIERARCH ESO INS OML1 ST = T / Start or stop the L&M OPD modulation.
HIERARCH ESO INS OML1 START = '2024-12-12T01:21:27.00' / Start UTC time of the L
HIERARCH ESO INS OML1 VOLT = 3.313904 / Move the L&M OML piezo manually in volt
HIERARCH ESO INS OML2 PERIOD = 0.273 / [sec] Timer output period of the L&M OPD
HIERARCH ESO INS OML2 ST = T / Start or stop the L&M OPD modulation.
HIERARCH ESO INS OML2 START = '2024-12-12T01:21:27.00' / Start UTC time of the L
HIERARCH ESO INS OML2 VOLT = 3.793945 / Move the L&M OML piezo manually in volt
HIERARCH ESO INS OML3 PERIOD = 0.273 / [sec] Timer output period of the L&M OPD
HIERARCH ESO INS OML3 ST = T / Start or stop the L&M OPD modulation.
HIERARCH ESO INS OML3 START = '2024-12-12T01:21:27.00' / Start UTC time of the L
HIERARCH ESO INS OML3 VOLT = 4.622803 / Move the L&M OML piezo manually in volt
HIERARCH ESO INS OML4 PERIOD = 0.273 / [sec] Timer output period of the L&M OPD
HIERARCH ESO INS OML4 ST = T / Start or stop the L&M OPD modulation.
HIERARCH ESO INS OML4 START = '2024-12-12T01:21:27.00' / Start UTC time of the L
HIERARCH ESO INS OML4 VOLT = 4.826355 / Move the L&M OML piezo manually in volt
HIERARCH ESO INS OMN1 PERIOD = 0.026 / [sec] Timer output period of the L&M OPD
HIERARCH ESO INS OMN1 ST = F / Start or stop the N OPD modulation.
HIERARCH ESO INS OMN1 START = '2024-12-12T01:21:27.00' / Start UTC time of the N
HIERARCH ESO INS OMN1 VOLT = 4.787292 / Move the N OMN piezo manually in volt un
HIERARCH ESO INS OMN2 PERIOD = 0.026 / [sec] Timer output period of the L&M OPD
HIERARCH ESO INS OMN2 ST = F / Start or stop the N OPD modulation.
HIERARCH ESO INS OMN2 START = '2024-12-12T01:21:27.00' / Start UTC time of the N
HIERARCH ESO INS OMN2 VOLT = 4.837646 / Move the N OMN piezo manually in volt un
HIERARCH ESO INS OMN3 PERIOD = 0.026 / [sec] Timer output period of the L&M OPD
HIERARCH ESO INS OMN3 ST = F / Start or stop the N OPD modulation.
HIERARCH ESO INS OMN3 START = '2024-12-12T01:21:27.00' / Start UTC time of the N
HIERARCH ESO INS OMN3 VOLT = 4.890747 / Move the N OMN piezo manually in volt un
HIERARCH ESO INS OMN4 PERIOD = 0.026 / [sec] Timer output period of the L&M OPD
HIERARCH ESO INS OMN4 ST = F / Start or stop the N OPD modulation.
HIERARCH ESO INS OMN4 START = '2024-12-12T01:21:27.00' / Start UTC time of the N
HIERARCH ESO INS OMN4 VOLT = 4.865112 / Move the N OMN piezo manually in volt un
HIERARCH ESO INS PIL ENC = 0 / [Enc] Component absolute position.
HIERARCH ESO INS PIL ID = 'PHOTO' / PIL unique ID.
HIERARCH ESO INS PIL NAME = 'PHOTO' / PIL name.
HIERARCH ESO INS PIL NO = 1 / PIL slot number.
HIERARCH ESO INS PIL TYPE = 'NA' / OPIL element type.
HIERARCH ESO INS PIN ENC = 232001 / [Enc] Component absolute position.
HIERARCH ESO INS PIN ID = 'INTER' / PIN unique ID.
HIERARCH ESO INS PIN NAME = 'INTER' / PIN name.
HIERARCH ESO INS PIN NO = 2 / PIN slot number.
HIERARCH ESO INS PIN TYPE = 'NA' / PIN element type.
HIERARCH ESO INS POL ENC = -12000 / L&M POL wheel absolute position [Enc].
HIERARCH ESO INS POL ID = 'OPEN' / L&M POL unique id.
HIERARCH ESO INS POL NAME = 'OPEN' / L&M POL name.
HIERARCH ESO INS POL NO = 1 / L&M POL wheel position index.
HIERARCH ESO INS POL SWSIM = T / If T, L&M POL is software simulated.
HIERARCH ESO INS PON ENC = -19989 / N PON wheel absolute position [Enc].
HIERARCH ESO INS PON ID = 'OPEN' / N PON unique id.
HIERARCH ESO INS PON NAME = 'OPEN' / N PON name.
HIERARCH ESO INS PON NO = 1 / Filter wheel position index.
HIERARCH ESO INS SENS1 STAT = 128 / Prevacuum Pressure Gauge Status.
HIERARCH ESO INS SENS10 VAL = 90.83 / [K] 80K radiation shield top Value.
HIERARCH ESO INS SENS100 STAT = 8228 / Turbo Molecular Pump Status.
HIERARCH ESO INS SENS101 STAT = 8708 / Vacuum Insulating Valve Status.
HIERARCH ESO INS SENS102 STAT = 8196 / Re-pressuration Valve Status.
HIERARCH ESO INS SENS103 STAT = F / LN2 tank level exceeded alarm.
HIERARCH ESO INS SENS104 STAT = F / Pressure in Prevacuum line is OK.
HIERARCH ESO INS SENS105 STAT = F / Turbo Molecular pump running nominal.
HIERARCH ESO INS SENS106 STAT = F / Dry Nitrogen line is connected.
HIERARCH ESO INS SENS107 STAT = T / Cabinet cooling flow rate OK.
HIERARCH ESO INS SENS108 STAT = 8192 / COB Warmup Heater Status.
HIERARCH ESO INS SENS109 STAT = 8192 / LN2 Vessel Warmup Heater Status.
HIERARCH ESO INS SENS11 STAT = 1 / 80K radiation shield bot Status.
HIERARCH ESO INS SENS110 STAT = 8192 / Sorption Pump Heater Status.
HIERARCH ESO INS SENS111 STAT = 99 / Pulsetube Compressor Status.
HIERARCH ESO INS SENS112 STAT = 128 / Voltage Monitoring - COB Heater alarm.
HIERARCH ESO INS SENS113 STAT = 128 / Current Monitoring - COB Heater alarm.
HIERARCH ESO INS SENS114 STAT = 128 / Voltage Monitoring - LN2 Vessel Heater ala
HIERARCH ESO INS SENS115 STAT = 128 / Current Monitoring - LN2 Vessel Heater .
HIERARCH ESO INS SENS116 STAT = 128 / Prevacuum Pressure Gauge Status.
HIERARCH ESO INS SENS117 VAL = 9.17E+00 / [mbar] Prevacuum Pressure Gauge Value.
HIERARCH ESO INS SENS118 STAT = 65 / Cryostat Pressure Gauge 1 Status.
HIERARCH ESO INS SENS119 VAL = 3.00E-07 / [mbar] Cryostat Pressure Gauge 1 Value
HIERARCH ESO INS SENS12 VAL = 82.61 / [K] 80K radiation shield bot Value.
HIERARCH ESO INS SENS120 STAT = 1 / Cryostat Pressure Gauge 2 Status.
HIERARCH ESO INS SENS121 VAL = 2.63E-07 / [mbar] Cryostat Pressure Gauge 2 Value
HIERARCH ESO INS SENS122 STAT = 128 / Turbomolecular pump speed Status.
HIERARCH ESO INS SENS123 VAL = 0.00 / [rpm] Turbomolecular pump speed Value.
HIERARCH ESO INS SENS124 STAT = 1 / 80K radiation shield top Status.
HIERARCH ESO INS SENS125 VAL = 91.88 / [K] 80K radiation shield top Value.
HIERARCH ESO INS SENS126 STAT = 1 / 80K radiation shield bot Status.
HIERARCH ESO INS SENS127 VAL = 81.23 / [K] 80K radiation shield bot Value.
HIERARCH ESO INS SENS128 STAT = 1 / spatial filter actuator Status.
HIERARCH ESO INS SENS129 VAL = 30.22 / [K] spatial filter actuator Value.
HIERARCH ESO INS SENS13 STAT = 1 / spatial filter actuator Status.
HIERARCH ESO INS SENS130 STAT = 1 / backbone, near cold head Status.
HIERARCH ESO INS SENS131 VAL = 29.95 / [K] backbone, near cold head Value.
HIERARCH ESO INS SENS132 STAT = 1 / wheel box actuator Status.
HIERARCH ESO INS SENS133 VAL = 31.11 / [K] wheel box actuator Value.
HIERARCH ESO INS SENS134 STAT = 1 / camera ZnSe lens Status.
HIERARCH ESO INS SENS135 VAL = 30.75 / [K] camera ZnSe lens Value.
HIERARCH ESO INS SENS136 STAT = '1' / camera ZnSe lens (redundant) Status
HIERARCH ESO INS SENS137 VAL = 30.75 / [K] camera ZnSe lens (redundant) Value.
HIERARCH ESO INS SENS138 STAT = 1 / BSB - near photo/interferometric act. Status
HIERARCH ESO INS SENS139 VAL = 31.27 / [K] BSB - near photo/interferometric act.
HIERARCH ESO INS SENS14 VAL = 30.83 / [K] spatial filter actuator Value.
HIERARCH ESO INS SENS140 STAT = 1 / Detector operation temperature Status.
HIERARCH ESO INS SENS141 VAL = 8.000 / [K] Detector operation temperature Value.
HIERARCH ESO INS SENS142 STAT = 1 / Detector warmup heater sensor Status.
HIERARCH ESO INS SENS143 VAL = 3.36 / [K] Detector warmup heater sensor Value.
HIERARCH ESO INS SENS144 STAT = 1 / Sorption pump temperature Status.
HIERARCH ESO INS SENS145 VAL = 84.26 / [K] Sorption pump temperature Value.
HIERARCH ESO INS SENS146 STAT = 1 / Ambient temperature Status.
HIERARCH ESO INS SENS147 VAL = 19.43 / [C] Ambient temperature Value.
HIERARCH ESO INS SENS148 STAT = 1 / Cabinet inside top temperature Status.
HIERARCH ESO INS SENS149 VAL = 20.51 / [C] Cabinet inside top temperature Value.
HIERARCH ESO INS SENS15 STAT = 1 / backbone, near cold head Status.
HIERARCH ESO INS SENS150 STAT = 1 / Cabinet inside bottom temperature Status.
HIERARCH ESO INS SENS151 VAL = 18.01 / [C] Cabinet inside bottom temperature Val
HIERARCH ESO INS SENS152 STAT = 1 / PLC unit temperature Status.
HIERARCH ESO INS SENS153 VAL = 22.05 / [C] PLC unit temperature Value.
HIERARCH ESO INS SENS154 STAT = 1 / Warmup heater unit temperature Status.
HIERARCH ESO INS SENS155 VAL = 20.00 / [C] Warmup heater unit temperature Value.
HIERARCH ESO INS SENS156 STAT = 1 / Cabinet coolant supply temperature Status.
HIERARCH ESO INS SENS157 VAL = 8.31 / [C] Cabinet coolant supply temperature Val
HIERARCH ESO INS SENS158 STAT = 1 / Cabinet coolant return temperature Status.
HIERARCH ESO INS SENS159 VAL = 9.48 / [C] Cabinet coolant return temperature Val
HIERARCH ESO INS SENS16 VAL = 30.47 / [K] backbone, near cold head Value.
HIERARCH ESO INS SENS160 VAL = 41.93 / [%] Cabinet cooling valve commanded posit
HIERARCH ESO INS SENS161 STAT = 515 / LN2 tank level detection - empty Status.
HIERARCH ESO INS SENS162 VAL = 75.52 / [%] LN2 tank level detection - empty Valu
HIERARCH ESO INS SENS163 STAT = F / LM-band cryostat - CAS alarm active.
HIERARCH ESO INS SENS164 STAT = F / LM-band cryostat - collective alarm active.
HIERARCH ESO INS SENS165 STAT = F / Evacuation Sequence alarm.
HIERARCH ESO INS SENS166 STAT = F / SP regeneration Sequence alarm.
HIERARCH ESO INS SENS167 STAT = F / cooldown sequence alarm.
HIERARCH ESO INS SENS168 STAT = F / warmup sequence alarm.
HIERARCH ESO INS SENS169 STAT = F / Cabinet Coolant Flow low alarm.
HIERARCH ESO INS SENS17 STAT = 1 / wheel box actuator Status.
HIERARCH ESO INS SENS170 STAT = F / He-compressor coolant flow low alarm.
HIERARCH ESO INS SENS171 STAT = F / He-compressor cabinet temperature alarm.
HIERARCH ESO INS SENS172 STAT = F / PSU Vacuum System alarm.
HIERARCH ESO INS SENS173 STAT = F / Roughing Pump alarm.
HIERARCH ESO INS SENS174 STAT = F / Turbomolecular Pump alarm.
HIERARCH ESO INS SENS175 STAT = F / Vacuum Insulating Valve alarm.
HIERARCH ESO INS SENS176 STAT = F / Re-PressurizationValve alarm.
HIERARCH ESO INS SENS177 STAT = F / PSU Warm-Up Heaters alarm.
HIERARCH ESO INS SENS178 STAT = F / Cold Bench Heater alarm.
HIERARCH ESO INS SENS179 STAT = F / LN2 Vessel Heater alarm.
HIERARCH ESO INS SENS18 VAL = 31.49 / [K] wheel box actuator Value.
HIERARCH ESO INS SENS180 STAT = F / Sorption Pump Heater alarm.
HIERARCH ESO INS SENS181 STAT = F / Detector Warm-Up Heater alarm.
HIERARCH ESO INS SENS182 STAT = F / Detector control heater alarm.
HIERARCH ESO INS SENS183 STAT = F / Detector preamplifier heater alarm.
HIERARCH ESO INS SENS184 STAT = F / Pulsetube Cooler alarm.
HIERARCH ESO INS SENS185 STAT = 3 / Operation mode.
HIERARCH ESO INS SENS186 STAT = 1 / Evacuation sequence step.
HIERARCH ESO INS SENS187 STAT = 1 / SP regeneration sequence step.
HIERARCH ESO INS SENS188 STAT = 1 / Warm-up sequence step.
HIERARCH ESO INS SENS189 VAL = 0.00 / [%] percentage the DW heater is running.
HIERARCH ESO INS SENS19 STAT = 1 / camera ZnSe lens Status.
HIERARCH ESO INS SENS190 VAL = 0.00 / [%] percentage the COB heater is running.
HIERARCH ESO INS SENS191 VAL = 0.00 / [%] percentage the LN heater is running.
HIERARCH ESO INS SENS192 VAL = 35.60 / [%] percentage the DET heater is running.
HIERARCH ESO INS SENS193 STAT = 1 / current range of the DET heater.
HIERARCH ESO INS SENS194 STAT = F / Evacuation sequence.
HIERARCH ESO INS SENS195 STAT = F / SP regeneration sequence.
HIERARCH ESO INS SENS196 STAT = F / Warmup sequence.
HIERARCH ESO INS SENS197 STAT = F / Cryostat is warm.
HIERARCH ESO INS SENS198 STAT = F / Cryostat is cold.
HIERARCH ESO INS SENS199 STAT = F / Cryostat T >= Warmup setpoint.
HIERARCH ESO INS SENS2 VAL = 7.34E+01 / [mbar] Prevacuum Pressure Gauge Value.
HIERARCH ESO INS SENS20 VAL = 31.05 / [K] camera ZnSe lens Value.
HIERARCH ESO INS SENS200 STAT = F / Sorption Pump reached reg. temp T >= Reg. SP
HIERARCH ESO INS SENS201 STAT = F / RMC motor control interlock.
HIERARCH ESO INS SENS202 STAT = F / Cryostat pressure is atmospheric >= 7.0E2mba
HIERARCH ESO INS SENS203 STAT = F / Cryostat pressure is <= 1 mbar.
HIERARCH ESO INS SENS204 STAT = F / Cryostat pressure is <= 1E-2 mbar.
HIERARCH ESO INS SENS205 STAT = F / Cryostat pressure is <= 1E-3 mbar.
HIERARCH ESO INS SENS206 STAT = F / Pressure Gauge VG2 is active.
HIERARCH ESO INS SENS207 STAT = F / Pressure Gauge VG3 is active.
HIERARCH ESO INS SENS208 STAT = F / PSU Vacuum System Pump on/off.
HIERARCH ESO INS SENS209 STAT = F / PSU Heater Status on/off.
HIERARCH ESO INS SENS21 STAT = 1 / camera ZnSe lens (redundant) Status.
HIERARCH ESO INS SENS210 STAT = 8196 / Roughing Vacuum Pump Status.
HIERARCH ESO INS SENS211 STAT = 8228 / Turbo Molecular Pump Status.
HIERARCH ESO INS SENS212 STAT = 8708 / Vacuum Insulating Valve Status.
HIERARCH ESO INS SENS213 STAT = 8196 / Re-pressuration Valve Status.
HIERARCH ESO INS SENS214 STAT = F / LN2 tank level exceeded alarm.
HIERARCH ESO INS SENS215 STAT = F / Pressure in Prevacuum line is OK.
HIERARCH ESO INS SENS216 STAT = F / Turbo Molecular pump running nominal.
HIERARCH ESO INS SENS217 STAT = F / Dry Nitrogen line is connected.
HIERARCH ESO INS SENS218 STAT = T / Cabinet cooling flow rate OK.
HIERARCH ESO INS SENS219 STAT = 8192 / COB Warmup Heater Status.
HIERARCH ESO INS SENS22 VAL = 31.09 / [K] camera ZnSe lens (redundant) Value.
HIERARCH ESO INS SENS220 STAT = 8192 / LN2 Vessel Warmup Heater Status.
HIERARCH ESO INS SENS221 STAT = 8192 / Sorption Pump Heater Status.
HIERARCH ESO INS SENS222 STAT = 99 / Pulsetube Compressor Status.
HIERARCH ESO INS SENS223 STAT = 128 / Voltage Monitoring - COB Heater alarm.
HIERARCH ESO INS SENS224 STAT = 128 / Current Monitoring - COB Heater alarm.
HIERARCH ESO INS SENS225 STAT = 128 / Voltage Monitoring - LN2 Vessel Heater ala
HIERARCH ESO INS SENS226 STAT = 128 / Current Monitoring - LN2 Vessel Heater.
HIERARCH ESO INS SENS227 STAT = T / Cabinet Coolant Flow Switch OK.
HIERARCH ESO INS SENS228 STAT = T / Flow rate NGC L OK.
HIERARCH ESO INS SENS229 STAT = T / Flow rate NGC N OK.
HIERARCH ESO INS SENS23 STAT = 1 / BSB - near photo/interferometric act. Status.
HIERARCH ESO INS SENS230 STAT = T / Flow rate IR Lamp OK.
HIERARCH ESO INS SENS231 STAT = F / WOP - CAS alarm active.
HIERARCH ESO INS SENS232 STAT = F / WOP - collective alarm active.
HIERARCH ESO INS SENS233 STAT = F / Cabinet Coolant Flow Low Alarm.
HIERARCH ESO INS SENS234 STAT = F / Flow rate NGC L Low Alarm.
HIERARCH ESO INS SENS235 STAT = F / Flow rate NGC N Low Alarm.
HIERARCH ESO INS SENS236 STAT = F / Flow rate IR Lamp Low Alarm.
HIERARCH ESO INS SENS237 STAT = 4 / PSU Cabinet Equipement Status.
HIERARCH ESO INS SENS238 STAT = 8200 / Laser Module Status.
HIERARCH ESO INS SENS239 STAT = 1 / SOS Ambient temperature Status.
HIERARCH ESO INS SENS24 VAL = 31.59 / [K] BSB - near photo/interferometric act.
HIERARCH ESO INS SENS240 VAL = 15.35 / [C] SOS Ambient temperature Value.
HIERARCH ESO INS SENS241 STAT = 1 / CPL Ambient temperature Status.
HIERARCH ESO INS SENS242 VAL = 15.35 / [C] CPL Ambient temperature Value.
HIERARCH ESO INS SENS243 STAT = 1 / CPN Ambient temperature Status.
HIERARCH ESO INS SENS244 VAL = 15.18 / [C] CPN Ambient temperature Value.
HIERARCH ESO INS SENS245 STAT = 1 / ARC Ambient temperature Status.
HIERARCH ESO INS SENS246 VAL = 14.15 / [C] ARC Ambient temperature Value.
HIERARCH ESO INS SENS247 STAT = 1 / ARC FFD temperature Status.
HIERARCH ESO INS SENS248 VAL = 17.11 / [C] ARC FFD temperature Value.
HIERARCH ESO INS SENS249 STAT = 65 / ARC box temperature Status.
HIERARCH ESO INS SENS25 STAT = 1 / Detector operation temperature Status.
HIERARCH ESO INS SENS250 VAL = 8.13 / [C] ARC box temperature Value.
HIERARCH ESO INS SENS251 STAT = 1 / ARC screen temperature Status.
HIERARCH ESO INS SENS252 VAL = 8.11 / [C] ARC screen temperature Value.
HIERARCH ESO INS SENS253 STAT = 1 / Coolant supply temperature Status.
HIERARCH ESO INS SENS254 VAL = 7.50 / [C] Coolant temperature Value.
HIERARCH ESO INS SENS255 STAT = 1 / Coolant return temperature Status.
HIERARCH ESO INS SENS256 VAL = 8.18 / [C] Coolant return temperature Value.
HIERARCH ESO INS SENS257 STAT = 1 / Cabinet ambient temperature Status.
HIERARCH ESO INS SENS258 VAL = 19.87 / [C] Cabinet ambient temperature Value.
HIERARCH ESO INS SENS259 STAT = 1 / Cabinet inside top temperature Status.
HIERARCH ESO INS SENS26 VAL = 40.016 / [K] Detector operation temperature Value.
HIERARCH ESO INS SENS260 VAL = 21.70 / [C] Cabinet inside top temperature Value.
HIERARCH ESO INS SENS261 STAT = 1 / Cabinet inside bottom temperature Status.
HIERARCH ESO INS SENS262 VAL = 17.99 / [C] Cabinet inside bottom temperature Val
HIERARCH ESO INS SENS263 STAT = 1 / PLC temperature Status.
HIERARCH ESO INS SENS264 VAL = 23.32 / [C] PLC temperature Value.
HIERARCH ESO INS SENS265 STAT = 1 / Cabinet Coolant Supply temperature Status.
HIERARCH ESO INS SENS266 VAL = 8.13 / [C] Cabinet Coolant Supply temperature Val
HIERARCH ESO INS SENS267 STAT = 1 / Cabinet Coolant Return temperature Status.
HIERARCH ESO INS SENS268 VAL = 10.95 / [C] Cabinet Coolant Return temperature Va
HIERARCH ESO INS SENS269 STAT = 1 / Motion Control Unit 1 temperature Status.
HIERARCH ESO INS SENS27 STAT = 1 / Detector preamp temperature (H2RG only) Statu
HIERARCH ESO INS SENS270 VAL = 23.86 / [C] Motion Control Unit 1 temperature Val
HIERARCH ESO INS SENS271 STAT = 1 / Motion Control Unit 2 temperature Status.
HIERARCH ESO INS SENS272 VAL = 24.35 / [C] Motion Control Unit 2 temperature Val
HIERARCH ESO INS SENS273 STAT = 1 / Motion Control Unit 3 temperature Status.
HIERARCH ESO INS SENS274 VAL = 23.19 / [C] Motion Control Unit 3 temperature Val
HIERARCH ESO INS SENS275 STAT = 1 / Motion Control Unit 4 temperature Status.
HIERARCH ESO INS SENS276 VAL = 23.76 / [C] Motion Control Unit 4 temperature Val
HIERARCH ESO INS SENS277 STAT = 1 / SCP1 supply temperature Status.
HIERARCH ESO INS SENS278 VAL = 6.83 / [C] SCP1 supply temperature Value.
HIERARCH ESO INS SENS279 STAT = 1 / SCP1 return temperature Status.
HIERARCH ESO INS SENS28 VAL = 75.787 / [K] Detector preamp temperature (H2RG onl
HIERARCH ESO INS SENS280 VAL = 19.38 / [C] SCP1 return temperature Value.
HIERARCH ESO INS SENS281 STAT = 1 / SCP2 supply temperature Status.
HIERARCH ESO INS SENS282 VAL = 7.83 / [C] SCP2 supply temperature Value.
HIERARCH ESO INS SENS283 STAT = 1 / SCP2 return temperature Status.
HIERARCH ESO INS SENS284 VAL = 10.23 / [C] SCP2 return temperature Value.
HIERARCH ESO INS SENS285 VAL = 44.76 / [%] Cabinet cooling valve commanded posit
HIERARCH ESO INS SENS286 STAT = 4 / IR Lamp housing cooling valve Status.
HIERARCH ESO INS SENS287 VAL = 0.00 / [%] IR Lamp housing cooling valve commande
HIERARCH ESO INS SENS288 VAL = 0.00 / [%] FFDC PID Loop manipulated variable.
HIERARCH ESO INS SENS29 STAT = 1 / Detector warmup heater sensor Status.
HIERARCH ESO INS SENS3 STAT = 65 / Cryostat Pressure Gauge 1 Status.
HIERARCH ESO INS SENS30 VAL = 4.00 / [K] Detector warmup heater sensor Value.
HIERARCH ESO INS SENS31 STAT = 1 / Sorption pump temperature Status.
HIERARCH ESO INS SENS32 VAL = 83.68 / [K] Sorption pump temperature Value.
HIERARCH ESO INS SENS33 STAT = 1 / Ambient temperature Status.
HIERARCH ESO INS SENS34 VAL = 19.70 / [C] Ambient temperature Value.
HIERARCH ESO INS SENS35 STAT = 1 / Cabinet inside top temperature Status.
HIERARCH ESO INS SENS36 VAL = 20.60 / [C] Cabinet inside top temperature Value.
HIERARCH ESO INS SENS37 STAT = 1 / Cabinet inside bottom temperature Status.
HIERARCH ESO INS SENS38 VAL = 18.60 / [C] Cabinet inside bottom temperature Valu
HIERARCH ESO INS SENS39 STAT = 1 / PLC unit temperature Status.
HIERARCH ESO INS SENS4 VAL = 1.06E-07 / [mbar] Cryostat Pressure Gauge 1 Value.
HIERARCH ESO INS SENS40 VAL = 21.61 / [C] PLC unit temperature Value.
HIERARCH ESO INS SENS41 STAT = 1 / Warmup heater unit temperature Status.
HIERARCH ESO INS SENS42 VAL = 20.70 / [C] Warmup heater unit temperature Value.
HIERARCH ESO INS SENS43 STAT = 1 / Cabinet coolant supply temperature Status.
HIERARCH ESO INS SENS44 VAL = 8.25 / [C] Cabinet coolant supply temperature Valu
HIERARCH ESO INS SENS45 STAT = 1 / Cabinet coolant return temperature Status.
HIERARCH ESO INS SENS46 VAL = 8.64 / [C] Cabinet coolant return temperature Valu
HIERARCH ESO INS SENS47 VAL = 34.65 / [%] Cabinet cooling valve commanded positi
HIERARCH ESO INS SENS48 STAT = 515 / LN2 tank level detection - empty Status.
HIERARCH ESO INS SENS49 VAL = 75.72 / [%] LN2 tank level detection - empty Value
HIERARCH ESO INS SENS5 STAT = 1 / Cryostat Pressure Gauge 2 Status.
HIERARCH ESO INS SENS50 STAT = F / LM-band cryostat - CAS alarm active.
HIERARCH ESO INS SENS51 STAT = F / LM-band cryostat - collective alarm active.
HIERARCH ESO INS SENS52 STAT = F / Evacuation Sequence alarm.
HIERARCH ESO INS SENS53 STAT = F / SP regeneration Sequence alarm.
HIERARCH ESO INS SENS54 STAT = F / cooldown sequence alarm.
HIERARCH ESO INS SENS55 STAT = F / warmup sequence alarm.
HIERARCH ESO INS SENS56 STAT = F / Cabinet Coolant Flow low alarm.
HIERARCH ESO INS SENS57 STAT = F / He-compressor coolant flow low alarm.
HIERARCH ESO INS SENS58 STAT = F / He-compressor cabinet temperature alarm.
HIERARCH ESO INS SENS59 STAT = F / PSU Vacuum System alarm.
HIERARCH ESO INS SENS6 VAL = 9.61E-08 / [mbar] Cryostat Pressure Gauge 2 Value.
HIERARCH ESO INS SENS60 STAT = F / Roughing Pump alarm.
HIERARCH ESO INS SENS61 STAT = F / Turbomolecular Pump alarm.
HIERARCH ESO INS SENS62 STAT = F / Vacuum Insulating Valve alarm.
HIERARCH ESO INS SENS63 STAT = F / Re-PressurizationValve alarm.
HIERARCH ESO INS SENS64 STAT = F / PSU Warm-Up Heaters alarm.
HIERARCH ESO INS SENS65 STAT = F / Cold Bench Heater alarm.
HIERARCH ESO INS SENS66 STAT = F / LN2 Vessel Heater alarm.
HIERARCH ESO INS SENS67 STAT = F / Sorption Pump Heater alarm.
HIERARCH ESO INS SENS68 STAT = F / Detector Warm-Up Heater alarm.
HIERARCH ESO INS SENS69 STAT = F / Detector control heater alarm.
HIERARCH ESO INS SENS7 STAT = 128 / Turbomolecular pump speed Status.
HIERARCH ESO INS SENS70 STAT = F / Detector preamplifier heater alarm.
HIERARCH ESO INS SENS71 STAT = F / Pulsetube Cooler alarm.
HIERARCH ESO INS SENS72 STAT = 3 / Operation mode.
HIERARCH ESO INS SENS73 STAT = 1 / Evacuation sequence step.
HIERARCH ESO INS SENS74 STAT = 1 / SP regeneration sequence step.
HIERARCH ESO INS SENS75 STAT = 1 / Warm-up sequence step.
HIERARCH ESO INS SENS76 VAL = 0.00 / [%] percentage the DW heater is running.
HIERARCH ESO INS SENS77 VAL = 0.00 / [%] percentage the COB heater is running.
HIERARCH ESO INS SENS78 VAL = 0.00 / [%] percentage the LN heater is running.
HIERARCH ESO INS SENS79 VAL = 29.10 / [%] percentage the DET heater is running.
HIERARCH ESO INS SENS8 VAL = 0.00 / [rpm] Turbomolecular pump speed Value.
HIERARCH ESO INS SENS80 STAT = 1 / Current range of the DET heater.
HIERARCH ESO INS SENS81 VAL = 0.00 / [%] percentage the DPT heater is running.
HIERARCH ESO INS SENS82 STAT = 1 / Current range of the DPT heater.
HIERARCH ESO INS SENS83 STAT = F / Evacuation sequence.
HIERARCH ESO INS SENS84 STAT = F / SP regeneration sequence.
HIERARCH ESO INS SENS85 STAT = F / Warmup sequence.
HIERARCH ESO INS SENS86 STAT = F / Cryostat is warm.
HIERARCH ESO INS SENS87 STAT = F / Cryostat is cold.
HIERARCH ESO INS SENS88 STAT = F / Cryostat T >= Warmup setpoint.
HIERARCH ESO INS SENS89 STAT = F / Sorption Pump reached reg. temp T >= Reg. SP
HIERARCH ESO INS SENS9 STAT = 1 / 80K radiation shield top Status.
HIERARCH ESO INS SENS90 STAT = F / RMC motor control interlock.
HIERARCH ESO INS SENS91 STAT = F / Cryostat pressure is atmospheric >= 7.0E2mbar
HIERARCH ESO INS SENS92 STAT = F / Cryostat pressure is <= 1 mbar.
HIERARCH ESO INS SENS93 STAT = F / Cryostat pressure is <= 1E-2 mbar.
HIERARCH ESO INS SENS94 STAT = F / Cryostat pressure is <= 1E-3 mbar.
HIERARCH ESO INS SENS95 STAT = F / Pressure Gauge VG2 is active.
HIERARCH ESO INS SENS96 STAT = F / Pressure Gauge VG3 is active.
HIERARCH ESO INS SENS97 STAT = F / PSU Vacuum System Pump on/off.
HIERARCH ESO INS SENS98 STAT = F / PSU Heater Status on/off.
HIERARCH ESO INS SENS99 STAT = 8196 / Roughing Vacuum Pump Status.
HIERARCH ESO INS SENSOR1 ID = 'sensor1' / Sensor device unique id.
HIERARCH ESO INS SENSOR1 NAME = 'Siemens PLC LM band' / Sensor device common nam
HIERARCH ESO INS SENSOR2 ID = 'sensor2' / Sensor device unique id.
HIERARCH ESO INS SENSOR2 NAME = 'Siemens PLC N band' / Sensor device common name
HIERARCH ESO INS SENSOR3 ID = 'sensor3' / Sensor device unique id.
HIERARCH ESO INS SENSOR3 NAME = 'Siemens PLC WOB' / Sensor device common name.
HIERARCH ESO INS SFL ENC = -90836 / [Enc] L&M Spatial Filter device absolute pos
HIERARCH ESO INS SFL ID = '1.50' / L&M Spatial Filter device unique ID.
HIERARCH ESO INS SFL NAME = '1.50' / L&M Spatial Filter device name.
HIERARCH ESO INS SFL NO = 7 / L&M Spatial Filter device slot number.
HIERARCH ESO INS SFL TYPE = 'NA' / L&M Spatial Filter device element type.
HIERARCH ESO INS SFN ENC = -90849 / [Enc] N SFN device absolute position.
HIERARCH ESO INS SFN ID = '2.00' / N SFN device unique ID.
HIERARCH ESO INS SFN NAME = '2.00' / N SFN device name.
HIERARCH ESO INS SFN NO = 7 / N SFN device slot number.
HIERARCH ESO INS SFN TYPE = 'NA' / N SFN device element type.
HIERARCH ESO INS SOS1 ENC = 186 / [Enc] Source Selector absolute position.
HIERARCH ESO INS SOS1 ID = 'OUT' / Source Selector unique ID.
HIERARCH ESO INS SOS1 NAME = 'OUT' / Source Selector name.
HIERARCH ESO INS SOS1 NO = 1 / Source Selector slot number.
HIERARCH ESO INS SOS1 TYPE = 'NA' / Source Selector type.
HIERARCH ESO INS SOS2 ENC = 190 / [Enc] Source Selector absolute position.
HIERARCH ESO INS SOS2 ID = 'OUT' / Source Selector unique ID.
HIERARCH ESO INS SOS2 NAME = 'OUT' / Source Selector name.
HIERARCH ESO INS SOS2 NO = 1 / Source Selector slot number.
HIERARCH ESO INS SOS2 TYPE = 'NA' / Source Selector type.
HIERARCH ESO INS SWSIM = 'NORMAL' / Software simulation.
HIERARCH ESO INS SYNC = ' ' / ICS assembly for synchronisation.
HIERARCH ESO INS TIMDL PERIOD = 0.273 / [sec] L&M Detector readout timer output
HIERARCH ESO INS TIMDL ST = T / Start or stop the L&M Detector readout timer.
HIERARCH ESO INS TIMDL START = '2024-12-12T01:21:27.00' / Start UTC for L&M Dete
HIERARCH ESO INS TIMDN PERIOD = 0.026 / [sec] Timer output period of the N Detec
HIERARCH ESO INS TIMDN ST = T / Start or stop the N Detector readout timer.
HIERARCH ESO INS TIMDN START = '2024-12-12T01:21:27.00' / Start UTC for N Detect
HIERARCH ESO ISS AIRM END = 1.116 / Airmass at end.
HIERARCH ESO ISS AIRM START = 1.117 / Airmass at start.
HIERARCH ESO ISS ALT = 63.517 / Altitude angles at start [deg].
HIERARCH ESO ISS AMBI FWHM END = 0.43 / Observatory seeing [arcsec].
HIERARCH ESO ISS AMBI FWHM START = 0.42 / Observatory seeing [arcsec].
HIERARCH ESO ISS AMBI IRSKY TEMP = -88.38 / Temperature of the IR sky, from radi
HIERARCH ESO ISS AMBI IWV END = 5.03 / Integrated Water Vapor [mm]
HIERARCH ESO ISS AMBI IWV START = 5.03 / Integrated Water Vapor [mm].
HIERARCH ESO ISS AMBI IWV30D END = 5.17 / IWV at 30deg elev [mm].
HIERARCH ESO ISS AMBI IWV30D START = 5.17 / IWV at 30deg elev [mm].
HIERARCH ESO ISS AMBI IWV30DSTD END = 0.07 / IWV at 30deg elev. [mm].
HIERARCH ESO ISS AMBI IWV30DSTD START = 0.07 / IWV at 30deg elev. [mm].
HIERARCH ESO ISS AMBI IWVSTD END = 0.02 / Integrated Water Vapor [mm].
HIERARCH ESO ISS AMBI IWVSTD START = 0.02 / Standard Deviation of Integrated Wat
HIERARCH ESO ISS AMBI LRATE = -0.0239 / Observatory ambient lapse rate [K/m].
HIERARCH ESO ISS AMBI PRES = 743.80 / Observatory ambient air pressure [hPa].
HIERARCH ESO ISS AMBI RHUM = 4.00 / Relative humidity [percentage].
HIERARCH ESO ISS AMBI TAU0 END = 0.010776 / Coherence time [seconds].
HIERARCH ESO ISS AMBI TAU0 START = 0.010800 / Coherence time [seconds].
HIERARCH ESO ISS AMBI TEMP = 15.97 / Observatory ambient temperature [C].
HIERARCH ESO ISS AMBI TEMPDEW = -26.23 / Observatory ambient dew temperature [C]
HIERARCH ESO ISS AMBI THETA0 END = 3.115000 / [arcsec] Isoplanatic angle.
HIERARCH ESO ISS AMBI THETA0 START = 3.594000 / [arcsec] Isoplanatic angle.
HIERARCH ESO ISS AMBI WINDDIR = 80.00 / Wind direction [deg].
HIERARCH ESO ISS AMBI WINDSP = 2.98 / Observatory wind speed [m/s].
HIERARCH ESO ISS ARAL IRISF NAME = 'K' / ARAL Iris filter (J,H,K)).
HIERARCH ESO ISS ARAL MIRR12 NAME = 'OUT' / GRAVITY feeding optics (IN,OUT)
HIERARCH ESO ISS ARAL MIRR13 NAME = 'IN' / MATISSE feeding optics 1 (IN,OU
HIERARCH ESO ISS ARAL MIRR14 NAME = 'OUT' / PIONIER feeding optics (IN,OUT)
HIERARCH ESO ISS ARAL MIRR15 NAME = 'IN' / MATISSE feeding optics 2 (IN,OU
HIERARCH ESO ISS ARAL MIRR16 NAME = ' ' / VISITOR1 feeding optics A (FREE
HIERARCH ESO ISS ARAL MIRR17 NAME = 'ONAXIS' / VISITOR1 feeding optics B (FREE
HIERARCH ESO ISS ARAL MIRR18 NAME = ' ' / VISITOR1 feeding optics C (FREE
HIERARCH ESO ISS ARAL MIRR19 NAME = ' ' / VISITOR2 feeding optics A (MIRR
HIERARCH ESO ISS ARAL MIRR20 NAME = ' ' / VISITOR2 feeding optics B (MIRR
HIERARCH ESO ISS ARAL MIRR21 NAME = ' ' / VISITOR2 feeding optics C (MIRR
HIERARCH ESO ISS ARAL MIRR22 NAME = 'MIRR' / ARAL Iris feeding optics 1 (MIR
HIERARCH ESO ISS ARAL MIRR23 NAME = 'MIRR' / ARAL Iris feeding optics 2 (MIR
HIERARCH ESO ISS ARAL MIRR24 NAME = 'IN' / ARAL Iris feeding optics 5 (IN,
HIERARCH ESO ISS ARAL MIRR25 NAME = 'OUT' / ARAL Iris feeding optics A1 (FR
HIERARCH ESO ISS ARAL MIRR26 NAME = 'OUT' / ARAL Iris feeding optics A2 (FR
HIERARCH ESO ISS AZ = 198.548 / Azimuth angles at start [deg].
HIERARCH ESO ISS BASELINE = 'UTs' / Interferometric Array.
HIERARCH ESO ISS CHOP FREQ = 0.915751 / Frequency of cycle [Hz].
HIERARCH ESO ISS CHOP GUIDE = 'A' / Guiding beam for chopping.
HIERARCH ESO ISS CHOP POSANG = 0.000 / Orientation on sky [deg].
HIERARCH ESO ISS CHOP PVRATIO = 1.00 / Peak-to-valley ratio [ratio].
HIERARCH ESO ISS CHOP ST = 'T' / Chopping status.
HIERARCH ESO ISS CHOP THROW = 4.0 / Amplitude of chopping [arcsec].
HIERARCH ESO ISS CONF A1L = 192.729269 / Static optical path length [m] arm 1.
HIERARCH ESO ISS CONF A2L = 187.009000 / Static optical path length [m] arm 2.
HIERARCH ESO ISS CONF A3L = 197.860441 / Static optical path length [m] arm 3.
HIERARCH ESO ISS CONF A4L = 208.064213 / Static optical path length [m] arm 4.
HIERARCH ESO ISS CONF DL1 = 'DL5' / Delay line used in arm 1.
HIERARCH ESO ISS CONF DL2 = 'DL2' / Delay line used in arm 2.
HIERARCH ESO ISS CONF DL3 = 'DL3' / Delay line used in arm 3 .
HIERARCH ESO ISS CONF DL4 = 'DL4' / Delay line used in arm 4.
HIERARCH ESO ISS CONF INPUT1 = 1 / Primary lab input channel arm 1.
HIERARCH ESO ISS CONF INPUT2 = 3 / Primary lab input channel arm 2.
HIERARCH ESO ISS CONF INPUT3 = 5 / Primary lab input channel arm 3.
HIERARCH ESO ISS CONF INPUT4 = 7 / Primary switchyard config. arm 4.
HIERARCH ESO ISS CONF NTEL = 4 / Number of telescopes used.
HIERARCH ESO ISS CONF STATION1 = 'U1' / Station of telescope arm 1.
HIERARCH ESO ISS CONF STATION2 = 'U2' / Station of telescope arm 2.
HIERARCH ESO ISS CONF STATION3 = 'U3' / Station of telescope arm 3.
HIERARCH ESO ISS CONF STATION4 = 'U4' / Station of telescope arm 4.
HIERARCH ESO ISS CONF SWYARD1 = 'compressed' / Primary switchyard config. arm 1.
HIERARCH ESO ISS CONF SWYARD2 = 'compressed' / Primary switchyard config. arm 2.
HIERARCH ESO ISS CONF SWYARD3 = 'compressed' / Primary switchyard config. arm 3.
HIERARCH ESO ISS CONF SWYARD4 = 'compressed' / Primary switchyard config. arm 4.
HIERARCH ESO ISS CONF T1NAME = 'UT1' / Telescope name arm 1.
HIERARCH ESO ISS CONF T1X = 9.931984 / Telescope X coordinate [m] arm 1.
HIERARCH ESO ISS CONF T1Y = 20.321165 / Telescope Y coordinate [m] arm 1.
HIERARCH ESO ISS CONF T1Z = 13.042382 / Telescope Z coordinate [m] arm 1.
HIERARCH ESO ISS CONF T2NAME = 'UT2' / Telescope name arm 2.
HIERARCH ESO ISS CONF T2X = -14.887328 / Telescope X coordinate [m] arm 2.
HIERARCH ESO ISS CONF T2Y = -30.501925 / Telescope Y coordinate [m] arm 2.
HIERARCH ESO ISS CONF T2Z = 13.044000 / Telescope Z coordinate [m] arm 2.
HIERARCH ESO ISS CONF T3NAME = 'UT3' / Telescope name arm 3.
HIERARCH ESO ISS CONF T3X = -44.909153 / Telescope X coordinate [m] arm 3.
HIERARCH ESO ISS CONF T3Y = -66.196030 / Telescope Y coordinate [m] arm 3.
HIERARCH ESO ISS CONF T3Z = 13.048928 / Telescope Z coordinate [m] arm 3.
HIERARCH ESO ISS CONF T4NAME = 'UT4' / Telescope name arm 4.
HIERARCH ESO ISS CONF T4X = -103.295410 / Telescope X coordinate [m] arm 4.
HIERARCH ESO ISS CONF T4Y = -43.976090 / Telescope Y coordinate [m] arm 4.
HIERARCH ESO ISS CONF T4Z = 13.062063 / Telescope Z coordinate [m] arm 4.
HIERARCH ESO ISS DATE = '2024-11-15T16:22:14.000' / Timestamp of last ISS build.
HIERARCH ESO ISS DID = 'ESO-VLT-DIC.ISS' / Data dictionary name.
HIERARCH ESO ISS FEED MODE = 'SINGLE_STS' / VLTI feed mode (TRANSPARENT,SINGLE_S
HIERARCH ESO ISS GEOELEV = 2669.0 / VLTI ground site height above WGS84 [m].
HIERARCH ESO ISS GEOLAT = -24.62743941 / VLTI site latitude (UV zero) [deg].
HIERARCH ESO ISS GEOLON = -70.40498688 / VLTI site longitude (UV zero) [deg].
HIERARCH ESO ISS IAS IRIS DIT = 0.003 / IRIS Detector Integration Time [s].
HIERARCH ESO ISS IAS IRIS_ERRSTDFLUX1 = 0.000 / Std deviation Flux (ADU).
HIERARCH ESO ISS IAS IRIS_ERRSTDFLUX2 = 0.000 / Std deviation Flux (ADU).
HIERARCH ESO ISS IAS IRIS_ERRSTDFLUX3 = 0.000 / Std deviation Flux (ADU).
HIERARCH ESO ISS IAS IRIS_ERRSTDFLUX4 = 0.000 / Std deviation Flux (ADU).
HIERARCH ESO ISS IAS IRIS_ERRSTDX1 = 0.000 / Std deviation X.
HIERARCH ESO ISS IAS IRIS_ERRSTDX2 = 0.000 / Std deviation X.
HIERARCH ESO ISS IAS IRIS_ERRSTDX3 = 0.000 / Std deviation X.
HIERARCH ESO ISS IAS IRIS_ERRSTDX4 = 0.000 / Std deviation X.
HIERARCH ESO ISS IAS IRIS_ERRSTDY1 = 0.000 / Std deviation Y.
HIERARCH ESO ISS IAS IRIS_ERRSTDY2 = 0.000 / Std deviation Y.
HIERARCH ESO ISS IAS IRIS_ERRSTDY3 = 0.000 / Std deviation Y.
HIERARCH ESO ISS IAS IRIS_ERRSTDY4 = 0.000 / Std deviation Y.
HIERARCH ESO ISS IAS IRIS_GUID = 'ON' / IRIS labguiding state (ON, OFF).
HIERARCH ESO ISS IAS MIRR9 NAME = 'OUT' / ARAL IAS ALI slide position for T
HIERARCH ESO ISS IAS OPTI10 NAME = 'TTS' / ARAL Iris Fly Eye and Telephoto
HIERARCH ESO ISS IAS OPTI9 NAME = 'OUT' / ARAL Iris notch filter setting (I
HIERARCH ESO ISS IAS SELECTED = 'IRIS' / Selected image alignment sensor (NO
HIERARCH ESO ISS ID = 'v ISS' / ISS version string.
HIERARCH ESO ISS IP1 IMAGEROT END = 281.739858 / Image rotation in lab for IP1 a
HIERARCH ESO ISS IP1 IMAGEROT START = 281.765344 / Image rotation in lab for IP1
HIERARCH ESO ISS IP1 PUPILROT END = 85.642497 / Pupil rotation in lab for IP1 at
HIERARCH ESO ISS IP1 PUPILROT START = 84.954513 / Pupil rotation in lab for IP1
HIERARCH ESO ISS IP3 IMAGEROT END = 281.737243 / Image rotation in lab for IP3 a
HIERARCH ESO ISS IP3 IMAGEROT START = 281.762705 / Image rotation in lab for IP3
HIERARCH ESO ISS IP3 PUPILROT END = 85.641295 / Pupil rotation in lab for IP3 at
HIERARCH ESO ISS IP3 PUPILROT START = 84.953310 / Pupil rotation in lab for IP3
HIERARCH ESO ISS IP5 IMAGEROT END = 281.743565 / Image rotation in lab for IP5 a
HIERARCH ESO ISS IP5 IMAGEROT START = 281.769029 / Image rotation in lab for IP5
HIERARCH ESO ISS IP5 PUPILROT END = 85.646351 / Pupil rotation in lab for IP5 at
HIERARCH ESO ISS IP5 PUPILROT START = 84.958338 / Pupil rotation in lab for IP5
HIERARCH ESO ISS IP7 IMAGEROT END = 281.737308 / Image rotation in lab for IP7 a
HIERARCH ESO ISS IP7 IMAGEROT START = 281.762782 / Image rotation in lab for IP7
HIERARCH ESO ISS IP7 PUPILROT END = 85.640371 / Pupil rotation in lab for IP7 at
HIERARCH ESO ISS IP7 PUPILROT START = 84.952376 / Pupil rotation in lab for IP7
HIERARCH ESO ISS MARCEL OPTI1 NAME = 'OUT' / ARAL MARCEL beam splitter A (O
HIERARCH ESO ISS MARCEL OPTI2 NAME = 'OUT' / ARAL MARCEL beam splitter B (O
HIERARCH ESO ISS MARCEL OPTI3 NAME = 'OUT' / ARAL MARCEL beam splitter C (O
HIERARCH ESO ISS MARCEL OPTI4 NAME = 'OUT' / ARAL MARCEL beam splitter D (O
HIERARCH ESO ISS MARCEL OPTI5 NAME = 'OUT' / ARAL MARCEL beam splitter E (O
HIERARCH ESO ISS MARCEL OPTI6 NAME = 'OUT' / ARAL MARCEL beam splitter F (O
HIERARCH ESO ISS MARCEL OPTI7 NAME = 'OUT' / ARAL MARCEL beam splitter G (O
HIERARCH ESO ISS MARCEL OPTI8 NAME = 'OUT' / ARAL MARCEL beam splitter H (O
HIERARCH ESO ISS OPER = 'I I Condor' / Name of VLTI operator.
HIERARCH ESO ISS PARANG END = -163.903 / Parallactic angle at end [deg].
HIERARCH ESO ISS PARANG START = -163.190 / Parallactic angle at start [deg].
HIERARCH ESO ISS PBL12 END = 50.800 / Projected baseline T1 T2 at end [m].
HIERARCH ESO ISS PBL12 START = 50.732 / Projected baseline T1 T2 at start [m].
HIERARCH ESO ISS PBL13 END = 92.487 / Projected baseline T1 T3 at end [m].
HIERARCH ESO ISS PBL13 START = 92.336 / Projected baseline T1 T3 at start [m].
HIERARCH ESO ISS PBL14 END = 123.068 / Projected baseline T1 T4 at end [m].
HIERARCH ESO ISS PBL14 START = 122.825 / Projected baseline T1 T4 at start [m].
HIERARCH ESO ISS PBL23 END = 42.521 / Projected baseline T2 T3 at end [m].
HIERARCH ESO ISS PBL23 START = 42.440 / Projected baseline T2 T3 at start [m].
HIERARCH ESO ISS PBL24 END = 87.667 / Projected baseline T2 T4 at end [m].
HIERARCH ESO ISS PBL24 START = 87.553 / Projected baseline T2 T4 at start [m].
HIERARCH ESO ISS PBL34 END = 62.453 / Projected baseline T3 T4 at end [m].
HIERARCH ESO ISS PBL34 START = 62.461 / Projected baseline T3 T4 at start [m].
HIERARCH ESO ISS PBLA12 END = 25.3 / Projected baseline orientation angle T1 T2
HIERARCH ESO ISS PBLA12 START = 25.2 / Projected baseline orientation angle T1 T
HIERARCH ESO ISS PBLA13 END = 32.3 / Projected baseline orientation angle T1 T3
HIERARCH ESO ISS PBLA13 START = 32.2 / Projected baseline orientation angle T1 T
HIERARCH ESO ISS PBLA14 END = 61.898 / Projected baseline orientation angle T1 T
HIERARCH ESO ISS PBLA14 START = 61.841 / Projected baseline orientation angle T1
HIERARCH ESO ISS PBLA23 END = 40.7 / Projected baseline orientation angle T2 T3
HIERARCH ESO ISS PBLA23 START = 40.6 / Projected baseline orientation angle T2 T
HIERARCH ESO ISS PBLA24 END = 82.101 / Projected baseline orientation angle T2 T
HIERARCH ESO ISS PBLA24 START = 82.095 / Projected baseline orientation angle T2
HIERARCH ESO ISS PBLA34 END = 108.856 / Projected baseline orientation angle T3
HIERARCH ESO ISS PBLA34 START = 108.858 / Projected baseline orientation angle T
HIERARCH ESO ISS REF DEC = 3245.67 / Reference Delta as given by user.
HIERARCH ESO ISS REF RA = 24130.26 / Reference Alpha as given by user.
HIERARCH ESO ISS TEMP LAB1 = 15.890 / Temp in lab.
HIERARCH ESO ISS TEMP TUN1 = 17.180 / Temp in tunnel west [C], duct A.
HIERARCH ESO ISS TEMP TUN2 = 16.100 / Temp in tunnel centre [C], M16 west.
HIERARCH ESO ISS TEMP TUN3 = 17.030 / Temp in tunnel centre [C], M16 east.
HIERARCH ESO ISS TEMP TUN4 = 18.150 / Temp in tunnel east [C], duct L.
HIERARCH ESO ISS TRAK STATUS = 'NORMAL' / Tracking status.
HIERARCH ESO ISS UT1 ALT ENC END = 1.111382 / UTi alt encoder expo end.
HIERARCH ESO ISS UT1 ALT ENC START = 1.109564 / UTi alt encoder expo start.
HIERARCH ESO ISS UT1 ALT TIME END = 60656.0613194 / Timestamp ISS.UTi.ALT.ENC.EN
HIERARCH ESO ISS UT1 ALT TIME START = 60656.0603009 / Timestamp ISS.UTi.ALT.ENC.
HIERARCH ESO ISS UT1 AZ ENC END = 2.836796 / UTi az encoder expo end.
HIERARCH ESO ISS UT1 AZ ENC START = 2.822973 / UTi az encoder expo start.
HIERARCH ESO ISS UT1 AZ TIME END = 60656.0613194 / Timestamp ISS.UTi.AZ.ENC.END.
HIERARCH ESO ISS UT1 AZ TIME START = 60656.0603009 / Timestamp ISS.UTi.AZ.ENC.ST
HIERARCH ESO ISS UT2 ALT ENC END = 1.110779 / UTi alt encoder expo end.
HIERARCH ESO ISS UT2 ALT ENC START = 1.108959 / UTi alt encoder expo start.
HIERARCH ESO ISS UT2 ALT TIME END = 60656.0613194 / Timestamp ISS.UTi.ALT.ENC.EN
HIERARCH ESO ISS UT2 ALT TIME START = 60656.0603009 / Timestamp ISS.UTi.ALT.ENC.
HIERARCH ESO ISS UT2 AZ ENC END = 2.842507 / UTi az encoder expo end.
HIERARCH ESO ISS UT2 AZ ENC START = 2.828684 / UTi az encoder expo start.
HIERARCH ESO ISS UT2 AZ TIME END = 60656.0613194 / Timestamp ISS.UTi.AZ.ENC.END.
HIERARCH ESO ISS UT2 AZ TIME START = 60656.0603009 / Timestamp ISS.UTi.AZ.ENC.ST
HIERARCH ESO ISS UT3 ALT ENC END = 1.109996 / UTi alt encoder expo end.
HIERARCH ESO ISS UT3 ALT ENC START = 1.108178 / UTi alt encoder expo start.
HIERARCH ESO ISS UT3 ALT TIME END = 60656.0613194 / Timestamp ISS.UTi.ALT.ENC.EN
HIERARCH ESO ISS UT3 ALT TIME START = 60656.0603009 / Timestamp ISS.UTi.ALT.ENC.
HIERARCH ESO ISS UT3 AZ ENC END = 2.842585 / UTi az encoder expo end.
HIERARCH ESO ISS UT3 AZ ENC START = 2.828761 / UTi az encoder expo start.
HIERARCH ESO ISS UT3 AZ TIME END = 60656.0613194 / Timestamp ISS.UTi.AZ.ENC.END.
HIERARCH ESO ISS UT3 AZ TIME START = 60656.0603009 / Timestamp ISS.UTi.AZ.ENC.ST
HIERARCH ESO ISS UT4 ALT ENC END = 1.110149 / UTi alt encoder expo end.
HIERARCH ESO ISS UT4 ALT ENC START = 1.108329 / UTi alt encoder expo start.
HIERARCH ESO ISS UT4 ALT TIME END = 60656.0613194 / Timestamp ISS.UTi.ALT.ENC.EN
HIERARCH ESO ISS UT4 ALT TIME START = 60656.0603009 / Timestamp ISS.UTi.ALT.ENC.
HIERARCH ESO ISS UT4 AZ ENC END = 2.839966 / UTi az encoder expo end.
HIERARCH ESO ISS UT4 AZ ENC START = 2.826147 / UTi az encoder expo start.
HIERARCH ESO ISS UT4 AZ TIME END = 60656.0613194 / Timestamp ISS.UTi.AZ.ENC.END.
HIERARCH ESO ISS UT4 AZ TIME START = 60656.0603009 / Timestamp ISS.UTi.AZ.ENC.ST
HIERARCH ESO ISS VLTITYPE = 'snapshot' / Type of interferometric observations.
HIERARCH ESO OBS AIRM = 2.0 / Req. max. airmass
HIERARCH ESO OBS AMBI TRANS = '2CLR' / Req. sky transparency
HIERARCH ESO OBS AOMODE = 'FULL_AO' / Req. AO mode
HIERARCH ESO OBS CONTAINER ID = 4110758 / Scheduling container ID
HIERARCH ESO OBS CONTAINER TYPE = 'U' / Scheduling container type
HIERARCH ESO OBS DID = 'ESO-VLT-DIC.OBS-2.2' / OBS Dictionary
HIERARCH ESO OBS EXECTIME = 0 / Expected execution time
HIERARCH ESO OBS GRP = '0' / linked blocks
HIERARCH ESO OBS ID = 4112663 / Observation block ID
HIERARCH ESO OBS MOON DIST = 3 / Req. min. angular dist. from moon [deg]
HIERARCH ESO OBS MOON FLI = 1.0 / Req. max. fractional lunar illum.
HIERARCH ESO OBS NAME = 'CAL_LN-NGC1068-HD16786_Standalone' / OB name
HIERARCH ESO OBS NTPL = 2 / Number of templates within OB
HIERARCH ESO OBS OBSERVER = 'UNKNOWN' / Observer Name
HIERARCH ESO OBS PI-COI ID = 101531 / ESO internal PI-COI ID
HIERARCH ESO OBS PI-COI NAME = 'UNKNOWN' / PI-COI name
HIERARCH ESO OBS PROG ID = '114.27UV.002' / ESO program identification
HIERARCH ESO OBS START = '2024-12-12T00:42:59' / OB start time
HIERARCH ESO OBS TARG NAME = 'HD 16786' / OB target name
HIERARCH ESO OBS TPLNO = 2 / Template number within OB
HIERARCH ESO OBS TURB = '70%' / Req. Atmospheric Turbulence Category
HIERARCH ESO OBS WATERVAPOUR = 30.0 / Req. water vapour
HIERARCH ESO OCS DET IMGNAME = 'MATISSE_OBS_RMNREC' / Data File Name.
HIERARCH ESO PCR ACQ END = '2024-12-12T01:28:12.157249' / End of data collection
HIERARCH ESO PCR ACQ START = '2024-12-12T01:26:51.148255' / Begining of data col
HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL
HIERARCH ESO TPL EXPNO = 26 / Exposure number within template
HIERARCH ESO TPL ID = 'MATISSE_hyb_obs' / Template signature ID
HIERARCH ESO TPL NAME = 'Celestial target observation' / Template name
HIERARCH ESO TPL NEXP = 40 / Number of exposures within template
HIERARCH ESO TPL PRESEQ = 'MATISSE_obs.seq' / Sequencer script
HIERARCH ESO TPL START = '2024-12-12T01:00:10' / TPL start time
HIERARCH ESO TPL VERSION = '$Revision: 332467 $' / Version of the template
ORIGFILE= 'MATISSE_OBS_RMNREC347_0009.fits' / Original File Name
ARCFILE = 'MATIS.2024-12-12T01:26:51.149.fits' / Archive File Name
CHECKSUM= '8JVE9JTB8JTB8JTB' / HDU checksum updated 2024-12-12T01:28:21
DATASUM = '0'              / data unit checksum updated 2024-12-12T01:28:21
END
XTENSION= 'BINTABLE'       / binary table extension
BITPIX  =                8 / 8-bit bytes
NAXIS   =                2 / 2-dimensional binary table
NAXIS1  =              322 / width of table in bytes
NAXIS2  =              108 / number of rows in table
PCOUNT  =                0 / size of special data area
GCOUNT  =                1 / one data group (required keyword)
TFIELDS =                5 / number of fields in each row
EXTNAME = 'ARRAY_DESCRIPTION' / FITS Extension name
ORIGIN  = 'ESO-PARANAL'    / European Southern Observatory
DATE    = '2024-12-12T01:28:19' / Date this file was written
TELESCOP= 'ESO-VLTI-U1234' / ESO <TEL>
HIERARCH ESO ISS DID = 'ESO-VLT-DIC.ISS' / Auto Added Keyword
HIERARCH ESO ISS ID = 'v ISS' / Auto Added Keyword
TFORM1  = '32A'            / data format of field: ASCII Character
TFORM2  = '32A'            / data format of field: ASCII Character
TFORM3  = 'I'              / data format of field: 2-byte INTEGER
TFORM4  = '128A'           / data format of field: ASCII Character
TFORM5  = '128A'           / data format of field: ASCII Character
TTYPE1  = 'BINTABLE'       / label for field   1
TTYPE2  = 'OPTI_NAME'      / label for field   2
TTYPE3  = 'VALUE'          / label for field   3
TTYPE4  = 'DESCRIPTION'    / label for field   4
TTYPE5  = 'REFERENCE'      / label for field   5
CHECKSUM= 'Kq2dLo1cKo1cKo1c' / HDU checksum updated 2024-12-12T01:28:21
DATASUM = '2078546551'     / data unit checksum updated 2024-12-12T01:28:21
END
XTENSION= 'BINTABLE'       / binary table extension
BITPIX  =                8 / 8-bit bytes
NAXIS   =                2 / 2-dimensional binary table
NAXIS1  =               48 / width of table in bytes
NAXIS2  =                4 / number of rows in table
PCOUNT  =                0 / size of special data area
GCOUNT  =                1 / one data group (required keyword)
TFIELDS =                6 / number of fields in each row
EXTNAME = 'ARRAY_GEOMETRY' / FITS Extension name
ORIGIN  = 'ESO-PARANAL'    / European Southern Observatory
DATE    = '2024-12-12T01:28:19' / Date this file was written
TELESCOP= 'ESO-VLTI-U1234' / ESO <TEL>
ARRAYX  =          1946405 / VLTI x coordinate
ARRAYY  =         -5467647 / VLTI y coordinate
ARRAYZ  =         -2642729 / VLTI z coordinate
ARRNAME = 'VLTI'           / Array Name
HIERARCH ESO ISS DID = 'ESO-VLT-DIC.ISS' / Auto Added Keyword
HIERARCH ESO ISS ID = 'v ISS' / Auto Added Keyword
FRAME   = 'GEOCENTRIC'     / Reference frame
TFORM1  = '8A'             / data format of field: ASCII Character
TFORM2  = '8A'             / data format of field: ASCII Character
TFORM3  = 'I'              / data format of field: 2-byte INTEGER
TFORM4  = 'E'              / data format of field: 4-byte REAL
TFORM5  = '3D'             / data format of field: 8-byte DOUBLE
TFORM6  = 'I'              / data format of field: 2-byte INTEGER
TTYPE1  = 'TEL_NAME'       / label for field   1
TTYPE2  = 'STA_NAME'       / label for field   2
TTYPE3  = 'STA_INDEX'      / label for field   3
TTYPE4  = 'DIAMETER'       / label for field   4
TTYPE5  = 'STAXYZ'         / label for field   5
TTYPE6  = 'MNTSTA'         / label for field   6
TUNIT4  = 'm'              / physical unit of field
TUNIT5  = 'm'              / physical unit of field
CHECKSUM= '2HAG5H392HAE2H39' / HDU checksum updated 2024-12-12T01:28:21
DATASUM = '3339830543'     / data unit checksum updated 2024-12-12T01:28:21
END
XTENSION= 'BINTABLE'       / binary table extension
BITPIX  =                8 / 8-bit bytes
NAXIS   =                2 / 2-dimensional binary table
NAXIS1  =              486 / width of table in bytes
NAXIS2  =                4 / number of rows in table
PCOUNT  =                0 / size of special data area
GCOUNT  =                1 / one data group (required keyword)
TFIELDS =               30 / number of fields in each row
EXTNAME = 'OPTICAL_TRAIN'  / FITS Extension name
ORIGIN  = 'ESO-PARANAL'    / European Southern Observatory
DATE    = '2024-12-12T01:28:19' / Date this file was written
TELESCOP= 'ESO-VLTI-U1234' / ESO <TEL>
ARRNAME = 'VLTI'           / Array Name
HIERARCH ESO ISS DID = 'ESO-VLT-DIC.ISS' / Auto Added Keyword
HIERARCH ESO ISS ID = 'v ISS' / Auto Added Keyword
NOPTI   =               14 / Number of optical elements
TFORM1  = 'I'              / data format of field: 2-byte INTEGER
TFORM10 = 'I'              / data format of field: 2-byte INTEGER
TFORM11 = '32A'            / data format of field: ASCII Character
TFORM12 = 'I'              / data format of field: 2-byte INTEGER
TFORM13 = '32A'            / data format of field: ASCII Character
TFORM14 = 'I'              / data format of field: 2-byte INTEGER
TFORM15 = '32A'            / data format of field: ASCII Character
TFORM16 = 'I'              / data format of field: 2-byte INTEGER
TFORM17 = '32A'            / data format of field: ASCII Character
TFORM18 = 'I'              / data format of field: 2-byte INTEGER
TFORM19 = '32A'            / data format of field: ASCII Character
TFORM2  = '8A'             / data format of field: ASCII Character
TFORM20 = 'I'              / data format of field: 2-byte INTEGER
TFORM21 = '32A'            / data format of field: ASCII Character
TFORM22 = 'I'              / data format of field: 2-byte INTEGER
TFORM23 = '32A'            / data format of field: ASCII Character
TFORM24 = 'I'              / data format of field: 2-byte INTEGER
TFORM25 = '32A'            / data format of field: ASCII Character
TFORM26 = 'I'              / data format of field: 2-byte INTEGER
TFORM27 = '32A'            / data format of field: ASCII Character
TFORM28 = 'I'              / data format of field: 2-byte INTEGER
TFORM29 = '32A'            / data format of field: ASCII Character
TFORM3  = '32A'            / data format of field: ASCII Character
TFORM30 = 'I'              / data format of field: 2-byte INTEGER
TFORM4  = 'I'              / data format of field: 2-byte INTEGER
TFORM5  = '32A'            / data format of field: ASCII Character
TFORM6  = 'I'              / data format of field: 2-byte INTEGER
TFORM7  = '32A'            / data format of field: ASCII Character
TFORM8  = 'I'              / data format of field: 2-byte INTEGER
TFORM9  = '32A'            / data format of field: ASCII Character
TTYPE1  = 'INDEX'          / label for field   1
TTYPE10 = 'VALUE4'         / label for field  10
TTYPE11 = 'OPTI_NAME5'     / label for field  11
TTYPE12 = 'VALUE5'         / label for field  12
TTYPE13 = 'OPTI_NAME6'     / label for field  13
TTYPE14 = 'VALUE6'         / label for field  14
TTYPE15 = 'OPTI_NAME7'     / label for field  15
TTYPE16 = 'VALUE7'         / label for field  16
TTYPE17 = 'OPTI_NAME8'     / label for field  17
TTYPE18 = 'VALUE8'         / label for field  18
TTYPE19 = 'OPTI_NAME9'     / label for field  19
TTYPE2  = 'TEL_NAME'       / label for field   2
TTYPE20 = 'VALUE9'         / label for field  20
TTYPE21 = 'OPTI_NAME10'    / label for field  21
TTYPE22 = 'VALUE10'        / label for field  22
TTYPE23 = 'OPTI_NAME11'    / label for field  23
TTYPE24 = 'VALUE11'        / label for field  24
TTYPE25 = 'OPTI_NAME12'    / label for field  25
TTYPE26 = 'VALUE12'        / label for field  26
TTYPE27 = 'OPTI_NAME13'    / label for field  27
TTYPE28 = 'VALUE13'        / label for field  28
TTYPE29 = 'OPTI_NAME14'    / label for field  29
TTYPE3  = 'OPTI_NAME1'     / label for field   3
TTYPE30 = 'VALUE14'        / label for field  30
TTYPE4  = 'VALUE1'         / label for field   4
TTYPE5  = 'OPTI_NAME2'     / label for field   5
TTYPE6  = 'VALUE2'         / label for field   6
TTYPE7  = 'OPTI_NAME3'     / label for field   7
TTYPE8  = 'VALUE3'         / label for field   8
TTYPE9  = 'OPTI_NAME4'     / label for field   9
CHECKSUM= 'cFaff9TdcEZdc9Zd' / HDU checksum updated 2024-12-12T01:28:21
DATASUM = '1295944027'     / data unit checksum updated 2024-12-12T01:28:21
END
XTENSION= 'BINTABLE'       / binary table extension
BITPIX  =                8 / 8-bit bytes
NAXIS   =                2 / 2-dimensional binary table
NAXIS1  =               20 / width of table in bytes
NAXIS2  =             2000 / number of rows in table
PCOUNT  =                0 / size of special data area
GCOUNT  =                1 / one data group (required keyword)
TFIELDS =                4 / number of fields in each row
EXTNAME = 'OPD_DL1'        / name of this binary table extension
HIERARCH ESO PCR ACQ FREQ = 2000.000000 / Frequency of item in cfg or setup.
HIERARCH ESO PCR ACQ THRESH = 20.000000 / Threshold of item in cfg or setup.
HIERARCH ESO PCR SUMMARY NCORRUPT = 39960 / Total Number of corrupted records.
HIERARCH ESO PCR SUMMARY NMISSED = 0 / Total Number of missed records.
HIERARCH ESO PCR SUMMARY NSAVED = 1 / Number of saved records.
HIERARCH ESO PCR SUMMARY NSCANNED = 156500 / Total Number of scanned records.
TFORM1  = '1J'             / data format of field: 4-byte INTEGER
TFORM2  = '1D'             / data format of field: 8-byte DOUBLE
TFORM3  = '1J'             / data format of field: 4-byte INTEGER
TFORM4  = '1J'             / data format of field: 4-byte INTEGER
TTYPE1  = 'TIME'           / label for field   1
TTYPE2  = 'rtOffset'       / label for field   2
TTYPE3  = 'frngDetected'   / label for field   3
TTYPE4  = 'offsValid'      / label for field   4
TUNIT1  = 'usec'           / physical unit of field
TUNIT2  = 'm'              / physical unit of field
TUNIT3  = '-'              / physical unit of field
TUNIT4  = '-'              / physical unit of field
CHECKSUM= 'Vnm5Xnl2Vnl2Vnl2' / HDU checksum updated 2024-12-12T01:28:21
DATASUM = '1680560161'     / data unit checksum updated 2024-12-12T01:28:21
END
XTENSION= 'BINTABLE'       / binary table extension
BITPIX  =                8 / 8-bit bytes
NAXIS   =                2 / 2-dimensional binary table
NAXIS1  =               20 / width of table in bytes
NAXIS2  =             2000 / number of rows in table
PCOUNT  =                0 / size of special data area
GCOUNT  =                1 / one data group (required keyword)
TFIELDS =                4 / number of fields in each row
EXTNAME = 'OPD_DL2'        / name of this binary table extension
HIERARCH ESO PCR ACQ FREQ = 2000.000000 / Frequency of item in cfg or setup.
HIERARCH ESO PCR ACQ THRESH = 20.000000 / Threshold of item in cfg or setup.
HIERARCH ESO PCR SUMMARY NCORRUPT = 151442 / Total Number of corrupted records.
HIERARCH ESO PCR SUMMARY NMISSED = 0 / Total Number of missed records.
HIERARCH ESO PCR SUMMARY NSAVED = 1 / Number of saved records.
HIERARCH ESO PCR SUMMARY NSCANNED = 156500 / Total Number of scanned records.
TFORM1  = '1J'             / data format of field: 4-byte INTEGER
TFORM2  = '1D'             / data format of field: 8-byte DOUBLE
TFORM3  = '1J'             / data format of field: 4-byte INTEGER
TFORM4  = '1J'             / data format of field: 4-byte INTEGER
TTYPE1  = 'TIME'           / label for field   1
TTYPE2  = 'rtOffset'       / label for field   2
TTYPE3  = 'frngDetected'   / label for field   3
TTYPE4  = 'offsValid'      / label for field   4
TUNIT1  = 'usec'           / physical unit of field
TUNIT2  = 'm'              / physical unit of field
TUNIT3  = '-'              / physical unit of field
TUNIT4  = '-'              / physical unit of field
CHECKSUM= 'hSVojRVmhRVmhRVm' / HDU checksum updated 2024-12-12T01:28:21
DATASUM = '270267516'      / data unit checksum updated 2024-12-12T01:28:21
END
XTENSION= 'BINTABLE'       / binary table extension
BITPIX  =                8 / 8-bit bytes
NAXIS   =                2 / 2-dimensional binary table
NAXIS1  =               20 / width of table in bytes
NAXIS2  =             2000 / number of rows in table
PCOUNT  =                0 / size of special data area
GCOUNT  =                1 / one data group (required keyword)
TFIELDS =                4 / number of fields in each row
EXTNAME = 'OPD_DL3'        / name of this binary table extension
HIERARCH ESO PCR ACQ FREQ = 2000.000000 / Frequency of item in cfg or setup.
HIERARCH ESO PCR ACQ THRESH = 20.000000 / Threshold of item in cfg or setup.
HIERARCH ESO PCR SUMMARY NCORRUPT = 151442 / Total Number of corrupted records.
HIERARCH ESO PCR SUMMARY NMISSED = 0 / Total Number of missed records.
HIERARCH ESO PCR SUMMARY NSAVED = 1 / Number of saved records.
HIERARCH ESO PCR SUMMARY NSCANNED = 156500 / Total Number of scanned records.
TFORM1  = '1J'             / data format of field: 4-byte INTEGER
TFORM2  = '1D'             / data format of field: 8-byte DOUBLE
TFORM3  = '1J'             / data format of field: 4-byte INTEGER
TFORM4  = '1J'             / data format of field: 4-byte INTEGER
TTYPE1  = 'TIME'           / label for field   1
TTYPE2  = 'rtOffset'       / label for field   2
TTYPE3  = 'frngDetected'   / label for field   3
TTYPE4  = 'offsValid'      / label for field   4
TUNIT1  = 'usec'           / physical unit of field
TUNIT2  = 'm'              / physical unit of field
TUNIT3  = '-'              / physical unit of field
TUNIT4  = '-'              / physical unit of field
CHECKSUM= 'UTcCaRZBVRaBaRYB' / HDU checksum updated 2024-12-12T01:28:21
DATASUM = '4293892779'     / data unit checksum updated 2024-12-12T01:28:21
END
XTENSION= 'BINTABLE'       / binary table extension
BITPIX  =                8 / 8-bit bytes
NAXIS   =                2 / 2-dimensional binary table
NAXIS1  =               20 / width of table in bytes
NAXIS2  =             2000 / number of rows in table
PCOUNT  =                0 / size of special data area
GCOUNT  =                1 / one data group (required keyword)
TFIELDS =                4 / number of fields in each row
EXTNAME = 'OPD_DL4'        / name of this binary table extension
HIERARCH ESO PCR ACQ FREQ = 2000.000000 / Frequency of item in cfg or setup.
HIERARCH ESO PCR ACQ THRESH = 20.000000 / Threshold of item in cfg or setup.
HIERARCH ESO PCR SUMMARY NCORRUPT = 151442 / Total Number of corrupted records.
HIERARCH ESO PCR SUMMARY NMISSED = 0 / Total Number of missed records.
HIERARCH ESO PCR SUMMARY NSAVED = 1 / Number of saved records.
HIERARCH ESO PCR SUMMARY NSCANNED = 156500 / Total Number of scanned records.
TFORM1  = '1J'             / data format of field: 4-byte INTEGER
TFORM2  = '1D'             / data format of field: 8-byte DOUBLE
TFORM3  = '1J'             / data format of field: 4-byte INTEGER
TFORM4  = '1J'             / data format of field: 4-byte INTEGER
TTYPE1  = 'TIME'           / label for field   1
TTYPE2  = 'rtOffset'       / label for field   2
TTYPE3  = 'frngDetected'   / label for field   3
TTYPE4  = 'offsValid'      / label for field   4
TUNIT1  = 'usec'           / physical unit of field
TUNIT2  = 'm'              / physical unit of field
TUNIT3  = '-'              / physical unit of field
TUNIT4  = '-'              / physical unit of field
CHECKSUM= 'ZWIYaV9YTVGYZV9Y' / HDU checksum updated 2024-12-12T01:28:21
DATASUM = '4217649844'     / data unit checksum updated 2024-12-12T01:28:21
END
XTENSION= 'BINTABLE'       / binary table extension
BITPIX  =                8 / 8-bit bytes
NAXIS   =                2 / 2-dimensional binary table
NAXIS1  =               20 / width of table in bytes
NAXIS2  =             2000 / number of rows in table
PCOUNT  =                0 / size of special data area
GCOUNT  =                1 / one data group (required keyword)
TFIELDS =                4 / number of fields in each row
EXTNAME = 'OPD_DL5'        / name of this binary table extension
HIERARCH ESO PCR ACQ FREQ = 2000.000000 / Frequency of item in cfg or setup.
HIERARCH ESO PCR ACQ THRESH = 20.000000 / Threshold of item in cfg or setup.
HIERARCH ESO PCR SUMMARY NCORRUPT = 151442 / Total Number of corrupted records.
HIERARCH ESO PCR SUMMARY NMISSED = 0 / Total Number of missed records.
HIERARCH ESO PCR SUMMARY NSAVED = 1 / Number of saved records.
HIERARCH ESO PCR SUMMARY NSCANNED = 156500 / Total Number of scanned records.
TFORM1  = '1J'             / data format of field: 4-byte INTEGER
TFORM2  = '1D'             / data format of field: 8-byte DOUBLE
TFORM3  = '1J'             / data format of field: 4-byte INTEGER
TFORM4  = '1J'             / data format of field: 4-byte INTEGER
TTYPE1  = 'TIME'           / label for field   1
TTYPE2  = 'rtOffset'       / label for field   2
TTYPE3  = 'frngDetected'   / label for field   3
TTYPE4  = 'offsValid'      / label for field   4
TUNIT1  = 'usec'           / physical unit of field
TUNIT2  = 'm'              / physical unit of field
TUNIT3  = '-'              / physical unit of field
TUNIT4  = '-'              / physical unit of field
CHECKSUM= 'ZacgcYZdZabdbWZd' / HDU checksum updated 2024-12-12T01:28:21
DATASUM = '3639741599'     / data unit checksum updated 2024-12-12T01:28:21
END
XTENSION= 'BINTABLE'       / binary table extension
BITPIX  =                8 / 8-bit bytes
NAXIS   =                2 / 2-dimensional binary table
NAXIS1  =               20 / width of table in bytes
NAXIS2  =             2000 / number of rows in table
PCOUNT  =                0 / size of special data area
GCOUNT  =                1 / one data group (required keyword)
TFIELDS =                4 / number of fields in each row
EXTNAME = 'OPD_DL6'        / name of this binary table extension
HIERARCH ESO PCR ACQ FREQ = 2000.000000 / Frequency of item in cfg or setup.
HIERARCH ESO PCR ACQ THRESH = 20.000000 / Threshold of item in cfg or setup.
HIERARCH ESO PCR SUMMARY NCORRUPT = 39960 / Total Number of corrupted records.
HIERARCH ESO PCR SUMMARY NMISSED = 0 / Total Number of missed records.
HIERARCH ESO PCR SUMMARY NSAVED = 1 / Number of saved records.
HIERARCH ESO PCR SUMMARY NSCANNED = 156500 / Total Number of scanned records.
TFORM1  = '1J'             / data format of field: 4-byte INTEGER
TFORM2  = '1D'             / data format of field: 8-byte DOUBLE
TFORM3  = '1J'             / data format of field: 4-byte INTEGER
TFORM4  = '1J'             / data format of field: 4-byte INTEGER
TTYPE1  = 'TIME'           / label for field   1
TTYPE2  = 'rtOffset'       / label for field   2
TTYPE3  = 'frngDetected'   / label for field   3
TTYPE4  = 'offsValid'      / label for field   4
TUNIT1  = 'usec'           / physical unit of field
TUNIT2  = 'm'              / physical unit of field
TUNIT3  = '-'              / physical unit of field
TUNIT4  = '-'              / physical unit of field
CHECKSUM= 'Vnk5Xnk2Vnk2Vnk2' / HDU checksum updated 2024-12-12T01:28:21
DATASUM = '1680560161'     / data unit checksum updated 2024-12-12T01:28:21
END